Frigidaire FRT15B3JW Use and Care Guide - Page 11

Looking Inside Continued

Page 11 highlights

LOOKING INSIDE (CONTINUED) To adjust cantilever shelves: NOTE Cantilever shelves are supported at the back of the refrigerator. Cantilever shelves are available in either glass or wire. 1 Lift front edge up. 2 Pull shelf out. Replace the shelf by inserting the hooks at rear of the shelf into the wall bracket. Lower the shelf into the desired slots and lock into position. SpillSafeTM glass shelves (some models) catch and hold accidental spills. In some models, the SpillSafeTM shelves slide out for easy access to food and for fast cleaning. The shelves slide out independently of the cantilever brackets. Just pull the front of the shelf forward. The shelf can be extended as far as the stopper will allow but it is not removable from the cantilever bracket. ADJUSTABLE DOOR BINS Some models have adjustable door bins that can be moved to suit individual needs. To move door bins 1. Lift bin straight up. 2. Remove bin. 3. Place bin in desired position. 4. Lower bin onto supports until locked in place. Adjustable Door Bin TALL BOTTLE RETAINER (SOME MODELS) The Tall Bottle Retainer keeps tall containers in the bin from falling forward when opening or closing the refrigerator door. To install, hold the retainer at the top, and slide it over the outside wall of the bin, as shown in the diagram. The Tall Bottle Retainer works best with a Bin Snugger. Full Width Cantilever Glass Shelf Cantilever Glass Shelf Fixed and Sliding DOOR STORAGE Door bins, shelves, and racks are provided for convenient storage of jars, bottles, and cans. Frequently used items can be quickly selected. Some models have door racks or bins that can accommodate gallon-sized plastic drink containers and economy-sized jars and containers. Some racks are adjustable for maximum storage capacity. The dairy compartment, which is warmer than the general food storage section, is intended for short term storage of cheese, spreads, or butter. Door Rack Tall Bottle Retainer (left) and Bin Snugger (right) SPECIAL ITEM RACK (SOME MODELS) The innovative design of the Special Item Rack allows you to store a six-pack of 12 ounce drink cans, a bottle of wine, a two-liter soft drink bottle, or a carton of eggs. The Special Item Rack mounts on the left side of your refrigerator. To install, just slide the Special Item Rack onto any shelf as shown in the drawing. Special Item Rack CRISPERS (SOME MODELS) The crispers, located under the bottom refrigerator shelf, are designed for storing fruits, vegetables, and other fresh produce. Wash items in clear water and remove excess water before placing them in the crispers. Items with strong odors or high moisture content should be wrapped before storing. Crisper Drawer 11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18

11
Full Width Cantilever
Glass Shelf
Cantilever Glass Shelf
Fixed and Sliding
DOOR STORAGE
Door bins, shelves, and racks are provided for convenient
storage of jars, bottles, and cans. Frequently used items can be
quickly selected.
Door Rack
Some models have door
racks or bins that can
accommodate gallon-sized
plastic drink containers and
economy-sized jars and
containers. Some racks are
adjustable for maximum
storage capacity.
The dairy compartment,
which is warmer than the
general food storage section,
is intended for short term
storage of cheese, spreads,
or butter.
LOOKING INSIDE (CONTINUED)
To adjust cantilever shelves:
NOTE
NOTE
NOTE
NOTE
NOTE
Cantilever shelves are supported at the back of the
refrigerator. Cantilever shelves are available in either glass
or wire.
1
Lift front edge up.
2
Pull shelf out.
Replace the shelf by inserting the hooks at rear of the shelf into
the wall bracket. Lower the shelf into the desired slots and lock
into position.
SpillSafe
TM
glass shelves (some models) catch and hold
accidental spills. In some models, the
SpillSafe
TM
shelves slide
out for easy access to food and for fast cleaning. The shelves
slide out independently of the cantilever brackets. Just pull the
front of the shelf forward. The shelf can be extended as far as
the stopper will allow but it is
not
removable from the cantilever
bracket.
ADJUSTABLE DOOR BINS
Some models have adjustable door bins that can be moved to
suit individual needs.
To move door bins
Adjustable
Door Bin
1.
Lift bin straight up.
2.
Remove bin.
3.
Place bin in desired
position.
4.
Lower bin onto supports
until locked in place.
TALL BOTTLE RETAINER (SOME MODELS)
The Tall Bottle Retainer keeps tall containers in the bin from
falling forward when opening or closing the refrigerator door.
To install, hold the retainer at the top, and slide it over the
outside wall of the bin, as shown in the diagram. The Tall Bottle
Retainer works best with a Bin Snugger.
Tall Bottle Retainer (left) and Bin Snugger (right)
SPECIAL ITEM RACK (SOME MODELS)
Special Item Rack
The innovative design of the
Special Item Rack allows you
to store a six-pack of 12 ounce
drink cans, a bottle of wine, a
two-liter soft drink bottle, or a
carton of eggs. The Special
Item Rack mounts on the left
side of your refrigerator. To
install, just slide the Special
Item Rack onto any shelf as
shown in the drawing.
CRISPERS (SOME MODELS)
Crisper Drawer
The crispers, located under
the bottom refrigerator
shelf,
are designed for storing fruits,
vegetables, and other fresh
produce. Wash items in clear
water and remove excess
water before
placing them in
the crispers. Items with strong
odors or high moisture content
should be wrapped before
storing.