Frigidaire PLEB30M9EC Use and Care Guide - Page 21
continued
![]() |
UPC - 057112090320
View all Frigidaire PLEB30M9EC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Setting Wall Oven Controls Consumer Defined Controls (continued) Setting Temperature Display - Fahrenheit or Celsius: The BROIL Broil and CLEAN Clean pads control the Fahrenheit or Celsius temperature display modes. The oven control can be programmed to display temperatures in Fahrenheit or Celsius. The oven has been preset at the factory to display in Fahrenheit. INSTRUCTIONS PRESS DISPLAY To change display from Fahrenheit to Celsius or Celsius to Fahrenheit 1. To tell if the display is set for Fahrenheit or Celsius press Broil (Figure 1) and hold for 7 seconds; "550°" will appear and "BROIL" will flash in the display and a beep will sound. If "F" appears, the display is set to show temperatures in Fahrenheit (Figure 2). If "C" appears, the display is set to show temperatures in Celsius (Figure 3). Broil for 7seconds Figure 1 Figure 2 2. Press Clean to switch between Fahrenheit or Celsius display Clean modes. The display will show either "F" (Figure 2) or "C" (Figure 3). Figure 3 3. Press START to accept the change or press Clear /Off to reject the change. START or Clear /Off 21
![](/manual_guide/products/frigidaire-pleb30m9ec-use-care-guide-d52d415/21.png)