Frigidaire PLEB30M9EC Use and Care Guide - Page 35
SPEED CLEAN, CLEAN, MAXX CLEAN, light soils, average soils, heavy soils, DO NOT, CLEAN, 3:00 HR,
UPC - 057112090320
View all Frigidaire PLEB30M9EC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Wall Oven Self-Cleaning Cycle Clean Self-Clean Cycle Time Length The SPEED CLEAN Speed clean , CLEAN Clean and MAXX CLEAN Maxx clean pads control the Self-Cleaning feature. If you are planning to use the oven directly after a self-clean cycle remember to allow time for the oven to cool down and the oven door to unlock. This normally takes about one hour. So a 3 hour self-clean cycle will actually take about 4 hours to complete. *It is recommend to use a Speed clean cycle (2 hour) for light soils, a Clean cycle (3 hour) for average soils, and a Maxx clean cycle (4 hour) for heavy soils (to assure satisfactory results). INSTRUCTIONS To set the controls for a 3 hour Self-Cleaning cycle to start immediately and shut off automatically 1. Be sure the clock is set with the correct time of day and the oven door is closed. To avoid possible burns use care when opening the oven door after the Self-Cleaning cycle. Stand to the side of the oven when opening the door to allow hot air or steam to escape. DO NOT force the oven door open. This can damage the automatic door locking system. Use caution and avoid possible burns when opening the door after the Self-Cleaning cycle has completed. The oven may still be VERY HOT. PRESS DISPLAY 2. Press Clean . "CLEAN" will flash and "3:00" HR will show in the display (Figure 1). The control will automatically clean for a 3 hour period (default self-cleaning cycle time). Note: If a 2 or 4 hour clean time is desired, press Speed clean for 2 hour or press Maxx clean for a 4 hour clean time. Set the cleaning time based on the amount of soil: light, medium or heavy (* See above). 3. Press START .The "DOOR LOCKED" icon will flash; "CLEAN" Clean Speed clean or Maxx clean START Figure 1 Figure 2 icon and the letters "CLn" will remain on in the display (Figure 2). 4. As soon as the control is set, the motor driven oven door lock will begin to close automatically. Once the door has been locked the "DOOR LOCKED" indicator light will stop flashing and remain on. Also, the oven icon will appear in the display (Figure 3). Note: Allow about 15 seconds for the oven door lock to close. Figure 3 When the Self-Clean Cycle is Completed 1. The time of day,"END", "DOOR LOCKED" and "CLEAN" will remain in the display (Figure 4). 2. Once the oven has cooled down for approximately 1 HOUR, and "DOOR LOCKED" is no longer displayed, the oven door can then be opened (Figure 5). Stopping or Interrupting a Self-Cleaning Cycle If it becomes necessary to stop or interrupt a self-cleaning cycle due to excessive smoke or fire in the oven: 1. Press Clear /Off . Clear /Off 2. The oven door can only be opened after the oven has cooled down for approximately 1 HOUR and "DOOR LOCKED" is no longer displayed (Figure 5). Figure 4 Figure 5 35