Frigidaire PLEB30M9EC Use and Care Guide - Page 22

Setting Wall Oven Controls Setting Preheat The PREHEAT Pre Heat pad controls the Preheat feature. The Preheat feature will bring the oven up to temperature and then indicate when to place the food in the oven. Use this feature when recipes call for preheating. Preheating is not necessary when roasting or cooking casseroles. The oven can be programmed to preheat at any temperature between 170°F to 550°F. INSTRUCTIONS PRESS DISPLAY To set the Preheat temperature for 350°F 1. Arrange the interior oven racks. 2. Press Pre Heat . "- - -" and "BAKE" will appear in the display Pre Heat (Figure 1). Figure 1 3. Press 3 5 0 . "350°" and "BAKE" will appear in the display (Figure 2). 4. Press START . "PRE" and "BAKE" will appear in the display as the 3 5 0 START Figure 2 oven heats and reaches 350°F (Figure 3). Note: After the oven has reached the desired temperature (this example, 350°F) the control will beep and the "PRE" light will turn off and oven temperature will be displayed (Figure 4). If you missed hearing the beep, you can tell that the oven has reached preheat temperature if you see the oven temperature showing in the oven display. Once the oven has preheated, PLACE FOOD IN THE OVEN. The "BAKE" light will stay on. Figure 3 Figure 4 Press Clear /Off when baking is complete or to cancel the preheat feature. To change Preheat temperature while oven is preheating (example: changing from 350°F to 425°F) If it is necessary to change the preheat temperature while the oven is preheating to the original temperature: 1. While preheating, press Pre Heat . "- - -" and "BAKE" will appear in the display (Figure 5) 2. Enter the new preheat temperature. Press 4 2 5 . "425°" and "BAKE" will appear in the display (Figure 6). Clear /Off Pre Heat 4 2 5 Figure 5 Figure 6 Figure 7 3. Press START . "PRE" and "BAKE" will appear in the display as the oven heats to 425°F (Figure 7). A beep will sound once the oven START temperature reaches 425°F and the display will show "425°" and "BAKE" (Figure 8). 4. When baking is complete press Clear /Off . Clear /Off Figure 8 22