Frigidaire PLEB30M9EC Use and Care Guide - Page 23

Setting Wall Oven Controls Setting Bake The BAKE Bake pad controls normal baking. If preheating is necessary, refer to the Pre Heat Preheat Feature for instructions. The oven can be programmed to bake at any temperature from 170° F to 550° F (The sample shown below is for 350°F). INSTRUCTIONS PRESS DISPLAY To set the Bake Temperature to 350°F 1. Arrange interior oven racks and place food in oven. 2. Press Bake will appear and "BAKE" will flash in the display (Figure 1). 3. Press 3 5 0 (Figure 2). "BAKE" will continue to flash and "350°" will appear in the display. Bake 3 5 0 Figure 1 4. Press START . A beep will sound once the oven temperature START reaches 350° F and the display will show "350°" and "BAKE" (Figure 3). Pressing Clear /Off will cancel the Bake feature at any time. Clear /Off Figure 2 Figure 3 To change the Bake Temperature (example: changing from 350°F to 425°F) 1. After the oven has already been set to bake at 350°F and the oven temperature needs to be changed to 425°F, press Bake (Figure4 will appear and "BAKE" will flash in the display. 2. Press 4 2 5 (Figure 5). "BAKE" will continue to flash and "425°" will appear in the display. Bake 4 2 5 Figure 4 Figure 5 3. Press START . "BAKE" and "425°" will stay in the display (See START Figure 6). Note: If the oven was recently heated from prior cooking and has remained heated, the bake element symbol may not show in the display immediately. Figure 6 23