Fujitsu 5530C2 Getting Started Guide - Page 16

5. Click [INSTALL PRODUCTS], and then click [ISIS Driver]. Your computer will restart and detect the scanner. Do not remove the Setup CD-ROM from the CD drive until your personal computer completely starts up again. 6. Error Recovery Guide Installation dialog box appears. Error Recovery Guide is an application with which you can view on-screen information for troubleshooting errors that may occur in the scanner. This guide helps solve problems, so select [Yes] to install it. You may also choose to install it later. ATTENTION After you select [Yes] for installing Error Recovery Guide, the [Choose Setup Language] dialog box appears. Select a language and follow the on-screen instructions. The Error Recovery Guide dialog box is automatically displayed when the installation is complete. Wait until the installation of the ISIS starts. 7. Select a language for the installation on the [Choose Setup Language] dialog box, and then click the [Next] button. ATTENTION Depending on the operating system you are using, you may need to do the following. Windows 2000: If you see the [Digital Signature not Found] dialog box, click [Yes]. Windows Vista: If you see the [Found New Hardware] dialog box, select [Locate and install driver software], and then in the [User Account Control] dialog box, click the [Continue] button, if it is displayed. The installation of FUJITSU ISIS is complete. Next, install ScandAll PRO. ATTENTION To make sure that FUJITSU ISIS is successfully installed, perform a scan with a TWAIN-compliant application such as ScandAll PRO. For information about how to scan with ScandAll PRO, refer to section 2.4 "Checking Scanner Driver Operation" on page 11. ScandAll PRO ■ Installing ScandAll PRO ScandAll PRO is software for scanning images, which is in conformity with both TWAN/ISIS standards. Using FUJITSU TWAIN 32 or FUJITSU ISIS together with ScandAll PRO allows you to create document images. ATTENTION Be sure to log on as a user with "Administrator" privileges. 8. Install the driver, following the on-screen instructions. 9. When you see the [InstallShield Wiizard Complete] dialog box, click the [Finish] button. 1. Insert the Setup CD-ROM into the CD drive. ⇒ appears. 2. Click [INSTALL PRODUCTS], and then click [ScandAll PRO]. 3. Select a language for the installation on [Choose Setup Language] dialog box, and then click the [OK] button. 8