Fujitsu 5530C2 Getting Started Guide - Page 24

■ Temporary error Indication U1 U2 U6 Meaning A paper feed error occurred. A multi feed error occurred. The print cartridge is not set. The following shows the procedure for releasing of each temporary error. • "U1" error 1. Remove jammed documents. (For details, refer to section 5.1 "Removing Jammed Documents" of "fi-5530C2 Operator's Guide on the Setup CD-ROM..) 2. Confirm that the documents meet the paper conditions for scanning. (For details, refer section 6.2 "Document Quality" of "fi-5530C2 Operator's Guide" on the Setup CD-ROM.) • "U2" error Press the [Send to] button on the Operator Panel. The papers that were multi fed will be ejected. • "U6" error This is a temporary error related with the Imprinter option (sold separately). For details, refer to chapter 5 "Error Message" of "fi-553PR Operator's Guide." ■ Device alarm (Permanent error) Indication E2 E3 E4 E6 E7 E8 E9 Ec Ed EF Meaning Trouble in the optical system (front). Trouble in the optical system (back). The motor fuse has blown out. Trouble in the operator panel. Trouble occurred in the internal memory (EEPROM). The SCSI interface fuse has blown out. An error in the image memory. An alarm in the memory. Trouble in the SCSI interface controller. A trouble in the Background switching mechanism. When you encounter any alarm, turn off and on the scanner. If the alarm is still displayed on the Function Number Display, contact the store where you purchased the scanner or an authorized FUJITSU scanner service provider. AP-3