Fujitsu XG2600 Hardware Guide - Page 50

Plugging in the USB Memory, Plug in the USB Memory, Replacing the USB Memory Unplug

Get Fujitsu XG2600 PDF manuals and user guides View all Fujitsu XG2600 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 50 highlights

XG2600 Hardware Guide Chapter 2 Installation 2.3.4 Plugging in the USB Memory USB memory can be plugged in from the port side of the switch. Caution Do NOT unplug out the memory stick during access. It may result in crashing setting data. Precautions It is possible to plug/unplug SFP+ module with the power on. Plug in the USB Memory Please refer to the following instructions; 1. Firmly insert the USB memory to USB port on the port side of the switch. USB Memory Replacing the USB Memory (Unplug) Please refer to the follow instructions; 1. Make the USB port to "disable status" using the console command. # usbctl disable 2. Check and confirm that USB port is in a "disable status". Execute command "show usb hcd status", and check and confirm that the status is displayed as "disable". # show usb hcd status [USB HCD STATUS] status : disable 3. Unplug the USB memory from the switch. Note The process ends here, when you are only detaching the USB memory from the switch. 4. Plug in the replacing USB memory onto the switch. 5. Release the "disable status" of the USB port using the console command. # usbctl enable 50 Connecting the Equipment

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
XG2600 Hardware Guide
Chapter 2 Installation
Connecting the Equipment
50
2.3.4
Plugging in the USB Memory
USB memory can be plugged in from the port side of the switch.
Caution
Do NOT unplug out the memory stick during access. It may result in crashing setting data.
Precautions
It is possible to plug/unplug SFP+ module with the power on.
Plug in the USB Memory
Please refer to the following instructions;
1.
Firmly insert the USB memory to USB port on the
port side
of the switch.
Replacing the USB Memory (Unplug)
Please refer to the follow instructions;
1.
Make the USB port to "disable status" using the console command.
2.
Check and confirm that USB port is in a "disable status".
Execute command "show usb hcd status", and check and confirm that the status is displayed as "disable".
3.
Unplug the USB memory from the switch.
4.
Plug in the replacing USB memory onto the switch.
5.
Release the "disable status" of the USB port using the console command.
# usbctl disable
# show usb hcd status
[USB HCD STATUS]
status
: disable
Note
The process ends here, when you are only detaching the USB memory from the switch.
# usbctl enable
USB Memory