Ganz Security PT112N PT112N/ Manual - Page 23

OSD Display of Main Screen Preset Label LABEL12345 OPERATION 3 PRESET1 Action Title Image Flip Camera ID F CAM 1 I:1--4 15/4/x1/N P/T/Z Information Alarm Information z P/T/Z Information Current Pan/Tilt angle in degree, zoom magnification and a compass direction. z Camera ID Current Camera ID (Address). z Action Title Followings are possible Action Titles and their meaning. "SET PRESET ×××" When Preset ××× is stored "PRESET ×××" When camera reach to Preset ××× "PATTERN ×" When Pattern × is in action "SWG×/PRESET ×××" When Swing × is in action z Preset Label z Alarm Input "UNDEFINED" When undefined function is called to run The Label stored for specific Preset. This information shows current state of Alarm Input. If an Input point is ON it will show a number corresponding to each point. If an Input point is OFF, '-' will be displayed. Example - if points 2 & 3 of inputs are ON, the OSD will show as below: I:-23- z Image Flip Indicates that images are currently reversed by Auto Flip Function. Speed Dome Camera Instruction Manual 23