Ganz Security PT112N PT112N/ Manual - Page 31
Pattern,swing/group
![]() |
View all Ganz Security PT112N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
HOW TO USE OSD MENU 4 Parking Action Setup PARKING ACTION SETUP PARK ENABLE OFF WAIT TIME 00:10:00 PARK ACTION HOME BACK EXIT Alarm Input Setup If Park Enable is set to ON, camera runs assigned function automatically if there is no PTZ command during assigned "Wait Time". z Park Enable [ON/OFF] z Wait Time [1~59 sec/1~180 minute] The time is displayed with "hh:mm:ss" format and can be changed in 1 min units. z Park Action [HOME/PRESET/PATTERN/SWING/GROUP] { HOME U Camera moves to home position if there is no PTZ command during assigned "Wait Time". ALARM INPUT SETUP ALARM NO. 1 TYPE ACTION HOLD TIME POST ACTION N.OPEN NOT USED ENDLESS HOME BACK EXIT Matches the Alarm sensor input to one of Preset positions. If an external sensor is activated, camera will move to corresponding preset position when this item is predefined. z Alarm × Type [Normal OPEN/Normal CLOSE] Sets sensor input type. z Alarm × Action [NOT USED/PRESET/PATTERN,SWING/GROUP] Assign counteraction Preset position to each Alarm input. z Hold Time [ENDLESS/1~59 sec/1~180 minute] Sets the time period for the action which is run by external sensor activation. After the time period passes, the action pre-defined in "Post Action" runs sequentially in succession to the action by external sensor activation. If this option is set to "ENDLESS", "Post Action" does not activate. z Post Action [HOME/PRESET/PATTERN/SWING/GROUP/PREV ACTION] Speed Dome Camera Instruction Manual 31
![](/manual_guide/products/ganz-security-pt112nxt-pt112n-manual-1ff98f2/31.png)