Ganz Security PT112N PT112N/ Manual - Page 33
Swing Setup
View all Ganz Security PT112N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
HOW TO USE OSD MENU 4 Swing Setup SWING SETUP SWING NO. 1 1ST POS. NOT USED 2ND POS. NOT USED SWING SPEED CLEAR SWING 30/SEC CANCEL BACK EXIT z Swing Number [1~8] Select Swing number to edit. If a selected Swing is not defined, "NOT USED" is displayed in 1st Position and 2nd Position z 1st Position 2nd Position [PRESET 1~128] Set up the 2 position for Swing function. If a selected preset is not defined, "UNDEFINED" will be displayed as shown below. SWING SETUP SWING NO. 1 1ST POS. PRESET5 2ND POS. NOT USED UNDEFINED z Swing Speed z Clear Swing When swing function runs, the camera will move from the preset assigned as the 1st point to the preset assigned as the 2nd point in a CW (Clockwise) direction. Then the camera will move from the preset assigned as the 2nd point to the preset assigned as the 1st point in a CCW (Counterclockwise) direction. If the preset assigned as the 1st point is same as the preset assigned as the 2nd point, the camera will turn 360° in CW direction and then turn 360° in CCW direction. [1°/sec ~180°/sec] Sets Swing speed from 1°/sec to 180°/sec. [CANCEL/OK] Deletes current Swing data. Speed Dome Camera Instruction Manual 33