Ganz Security Z8-D2M-2 Z8-D2_VD2 Series Operation Guide - Page 23
Motion
View all Ganz Security Z8-D2M-2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Operation Guide Figure 2-16 D-EFFECT interface 2 OSD Setting Procedure Step 1 Press the UP or DOWN button to select FREEZE, and press the LEFT or RIGHT button to set this parameter to ON or OFF. The default value is OFF. Step 2 Press the UP or DOWN button to select MIRROR, and press the LEFT or RIGHT button to set this parameter. The options are OFF, ROTATE, V-FLIP, and MIRROR. The default value is OFF. Step 3 Press the UP or DOWN button to select NEG.IMAGE, and press the LEFT or RIGHT button to set this parameter to ON or OFF. The default value is OFF. Step 4 Press the UP or DOWN button to select RETURN, and press the OK button to return to the SPECIAL interface. ----End 2.7.3 MOTION Press the UP or DOWN button to select MOTION, and press the LEFT or RIGHT button to set this parameter to ON or OFF. Set MOTION to ON and press the OK button to open the MOTION interface, as shown in Figure 2-17. Issue V1.0 (2017-07-28) 19 ganzsecurity.com