Ganz Security Z8-D2M-2 Z8-D2_VD2 Series Operation Guide - Page 31
Black Dpc
View all Ganz Security Z8-D2M-2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Operation Guide Figure 2-26 DPC interface 2 OSD Setting Step 3 Press the UP or DOWN button to select DPC VIEW, and press the LEFT or RIGHT button to set this parameter to ON or OFF. Step 4 Press the UP or DOWN button to select LEVEL, and press the LEFT or RIGHT button to set this parameter. The value range is 0-60, and the default value is 35. Step 5 Press the UP or DOWN button to select AGC, and press the LEFT or RIGHT button to set this parameter. The value range is 0-14, and the default value is 14. Step 6 Press the UP or DOWN button to select SENS-UP, and press the LEFT or RIGHT button to set this parameter. The options are ×2、×4、×8、×10、×15、×20、×25、×30, and the default value is ×2. Step 7 Press the UP or DOWN button to select RETURN, and press the SET button to return to the WHITE DPC interface. 2.7.6.3 BLACK DPC Press the UP or DOWN button to select BLACK DPC, and press the LEFT or RIGHT button to set this parameter to ON or OFF. Set BLACK DPC to ON and press the OK button to open the BLACK DPC interface, as shown in Figure 2-27. Issue V1.0 (2017-07-28) 27 ganzsecurity.com