Garmin Astro Astro and DC 30 Owner's Manual - Page 50
Settings, System Setup
UPC - 753759063931
View all Garmin Astro manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Settings Settings The Settings menu (MENU > MENU > Advanced > Settings) customizes the operation of your Astro 220. System Setup To open the System page: Press MENU > MENU > Advanced > Settings > System. • GPS-sets the unit to operate in Normal mode, Battery Saver mode, GPS Off, or Demo Mode. • WAAS/EGNOS-enables or disables WAAS (Wide Area Augmentation System) in the U.S., or EGNOS (European Geostationary Navigation Overlay Service). • Battery Type-selects the battery type (alkaline, NiMH, or lithium). • External Power Lost-selects whether the Astro 220 stays on or turns off when external power is removed. • Proximity Alarms-turns all proximity alarms on or off. To restore system defaults and view system information: On the System page, press MENU. • Restore Defaults-restores system settings to the default settings. • View Card Info-displays the microSD card status. • Mass Storage Mode-allows you to use the microSD card as a data-storage device • Software Version-displays the Astro 220 software version, the GPS SW version, and the unit identification number. Note: View Card Info and Mass Storage Mode are available only when a microSD card is installed. 44 Astro Dog Tracking System Owner's Manual