Garmin Foretrex 201 Owner's Manual - Page 17
Charging the Battery, Connecting the ForeTrex 201 to your Computer - serial port
UPC - 753759045302
View all Garmin Foretrex 201 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Charging the Battery The Foretrex 201 operates on a rechargeable lithium-ion battery. This battery lasts as long as 15 hours when fully charged. To charge the battery: 1. Wipe the contacts dry, if needed. 2. Snap the Cradle to the unit with the 4-contact end in first (shown in the top image to the right). 3. Connect the AC Charging Cable in to the connector labeled "5.0V DC" (shown in the lower image to the right) on the Charging Cradle. 4. Connect the AC Charging Cable to a power source. Full recharge time should take between 2 and 3 hours. The battery must be charged at least 2 hours before initial use. NOTE: If the unit has been stored for a long period of time, it may require up to 30 minutes of charging before it powers on and/or indicates charging. The Foretrex 201 unit's memory stores your data indefinitely. Battery life may be decreased in extreme temperatures or as the battery ages. Overview Getting Started Snapping the Foretrex 201 into the cradle Serial Connector Back of Cradle Connecting the Foretrex 201 to your Computer To connect your Foretrex 201 to your computer, place the unit in the cradle as described above. Connect the PC Interface Cable to the Serial Connector on the Cradle. Connect the other end of the PC Interface Cable to an available serial port on your computer. 5.0V DC Power Connector 5