Home » Garmin Manuals » GPS » Garmin G2000 » Manual Viewer

Garmin G2000 Cockpit Reference - Page 18

Displaying Selected Altitude in Meters, Setting the Baro Transition Alert, Change Navigation Sources

View all Garmin G2000 manuals

Add to My Manuals
Save this manual to your list of manuals

Page 18 highlights

Instruments Flight EIS XPDR/Audio Nav/Com/ AFCS FMS Nav Flight Planning Flight Instruments DISPLAYING SELECTED ALTITUDE IN METERS 1) Press the PFD Settings Softkey on the PFD to display the second-level softkeys. 2) Press the Other PFD Settings Softkey. 3) Press the Altitude Units Softkey. 4) Press the Meters Softkey to turn on metric altitude readouts. 5) Press the Back Softkey to return to the previous level of softkeys. SETTING THE BARO TRANSITION ALERT 1) From the Home Screen on the Touchscreen Controller, touch Utilities > Setup > Avionics Settings. 2) Touch the Alerts Tab. • To turn the alert on or off, touch the Baro Transition Alert Enable Button. An illuminated green line below "Enable" indicates that the alert is on. • To set or change the Baro Transition Alert Altitude, touch the Baro Transition Alert Data Field. Enter the desired altitude on the keypad, and touch Enter. CHANGE NAVIGATION SOURCES 1) Press the Active Nav Softkey on the PFD to change from FMS to VOR1 or LOC1. 2) Press the Active Nav Softkey again to change from VOR1 or LOC1 to VOR2 or LOC2. 3) Press the Active Nav Softkey a third time to return to FMS. CHANGING THE SELECTED GPS CDI SETTING 1) From the Home Screen on the Touchscreen Controller, touch Utilities > Setup > Avionics Settings. 2) Touch the System Tab. 3) Touch the GPS CDI Data Field. 4) Touch desired setting (2.00 NM, 1.00 NM, 0.30 NM, or AUTO). Procedures Hazard Avoidance Additional Features Abnormal Operation Annun/ Alerts Appendix Index 2 Garmin G2000 Cockpit Reference Guide for the Cessna Corvalis T240 190-01264-01 Rev. A

Section	Page
Flight Instruments	17
Selecting the Altimeter Barometric Pressure Setting	17
Selecting Standard Barometric Pressure	17
Changing Altimeter Barometric Pressure Setting Units	17
Setting the Selected Altitude	17
Displaying Selected Altitude in Meters	18
Setting the Baro Transition Alert	18
Change Navigation Sources	18
Changing the Selected GPS CDI Setting	18
Changing Navigation Angle Setting	19
Enable/Disable OBS Mode While Navigating with FMS	19
Adjusting Selected Heading	19
Adjusting Selected Course	19
Selecting Bearing Display and Changing Sources	19
Set Barometric Minimum Descent Altitude	20
Displaying Wind Data	20
Changing Vspeeds and Turning Vspeed Flags On/Off	20
Turning All Vspeed Flags On/Off	20
Restoring All Vspeed Defaults	21
Enable Split Screen PFD	21
Disable Split Screen PFD	21
Synthetic Vision System	21
Engine Indication System	23
Engine/System Display	24
Fuel Calculations	26
Engine Lean Assist Mode	27
Nav/Com/Transponder/Audio Panel	29
Selecting a COM Radio	29
Com Frequency Tuning	30
Changing Com Frequency Channel Spacing	31
Simultaneous COM Operation	32
Selecting a NAV Radio	32
NAV Radio Tuning	32
ADF Tuning (Optional)	33
DME Tuning (Optional)	35
Transponder Operation	35
Intercom	37
Digital Clearance Player	41
Entertainment Inputs	42
3D Audio	43
Automatic Flight Control System	45
Flight Director Activation	45
Vertical Modes	46
Lateral Modes	47
FMS Navigation	49
Direct-to Navigation	49
Activate a Stored Flight Plan	50
Activate a Flight Plan Leg	50
Stop Navigating a Flight Plan	51
Vertical Navigation (VNAV)	51
Flight Planning	57
Weight And Fuel Planning	57
Trip Planning	58
Create a User Waypoint	61
Create a Flight Plan	62
Import a Flight Plan from an SD Card	64
Insert a Waypoint in the Active Flight Plan	65
Enter an Airway in an Active Flight Plan	65
Activating Parallel Track	66
User-Defined Holding Patterns	66
Invert An Active Flight Plan	68
Store a Flight Plan	68
Insert a Waypoint in a Stored Flight Plan	69
Enter an Airway in a Stored Flight Plan	69
Removing Flight Plan Items	70
Invert and Activate a Stored Flight Plan	73
Copy a Stored Flight Plan	73
Delete a Stored Flight Plan	73
Export a Flight Plan to an SD Card	74
Procedures	75
Load and Activate a Departure Procedure	75
Load An Arrival Procedure	76
Load and/or Activate an Approach Procedure	77
Activate An Approach in the Active Flight Plan	79
Activate a Vector to Final Approach Fix	80
Activate A Missed Approach in the Active Flight Plan	80
Temperature Compensated Altitude	81
Hazard Avoidance	83
Customizing the Hazard Displays on the Navigation Map	83
Lightning Detection System (Optional)	86
SiriusXM Weather (Optional)	88
Garmin Connext™ Weather (Optional)	90
Traffic Advisory System	96
Terrain-SVT	98
Terrain Awareness & Warning System (TAWS) Display (Optional)	99
Additional Features	103
Terminal Procedure Charts	103
Airport Directory	106
SiriusXM Radio Entertainment (Optional)	106
Text Messaging (SMS) (Optional)	109
Scheduled Messages	112
Electronic Stability and Protection	114
Electronic Documents (Optional)	115
Environmental Control Settings	118
Crew Profiles	119
Electronic Checklists (Optional)	121
Abnormal Operation	123
Reversionary Mode	123
Stuck Microphone	123
COM Tuning Failure	123
Audio Controller Fail-Safe Operation	124
Hazard Displays with Loss of FMS Position	124
Unusual Attitudes	124
Dead Reckoning	125
Annunciations & Alerts	127
CAS Alerts	127
Comparator Alerts	129
Reversionary Sensor Alerts	130
Message Advisory	130
AFCS Alerts	131
Terrain-SVT Alerts	132
TAWS Alerts	133
GDL 69/69A Data Link Receiver Messages	136
Voice Alerts	136
GDU 1400W Primary Flight Display & Multi Function Display	137
Database System Messages	139
GIA 63W Integrated Avionics Unit System Messages	140
GDC 74A Air Data Computer System Messages	144
GEA 71 Engine/Airframe Unit System Messages	144
GTX 33 Transponder System Messages	144
GTS 800 Traffic Advisory System Messages	145
GSR 56 Message Advisories	145
GMU 44 Magnetometer System Messages	145
GRS 77 Attitude and Heading Reference System Messages	146
GTC 570 Touchscreen Controller System Messages	148
GCU 275 PFD Controller System Messages	148
GDL 69/69A Satellite Datalink Receiver System Messages	149
GMA 36 Remote Audio Controller System Messages	149
GMC 720 AFCS Controller System Messages	150
Miscellaneous System Messages	150
Flight Plan Import/Export Messages	155
Crew Profile Import/Export Messages	156
Appendix	159
PFD Softkeys	159
GTC Screens	165
Database Management	177
Automatic Database Synchronization Feature	181
Garmin Databases	184
Magnetic Field Variation Database Update	186
Cleaning the Touchscreen	188

Match case Limit results 1 per page

Garmin G2000 Cockpit Reference Guide for the Cessna Corvalis T240

190-01264-01

Rev. A

Flight Instruments

Flight

Instruments

EIS

Nav/Com/

XPDR/Audio

AFCS

FMS Nav

Flight

Planning

Procedures

Hazard

Avoidance

Additional

Features

Abnormal

Operation

Annun/

Alerts

Appendix

Index

DISPLAYING SELECTED ALTITUDE IN METERS

Press the

PFD Settings

Softkey on the PFD to display the second-level

softkeys.

Press the

Other PFD Settings

Softkey.

Press the

Altitude Units

Softkey.

Press the

Meters

Softkey to turn on metric altitude readouts.

Press the

Back

Softkey to return to the previous level of softkeys.

SETTING THE BARO TRANSITION ALERT

From the

Home

Screen on the Touchscreen Controller

touch

Utilities

Setup

Avionics Settings

Touch the

Alerts

Tab.

•

To turn the alert on or off, touch the

Baro Transition Alert Enable

Button.

An illuminated green line below “Enable” indicates that the alert is

on.

•

To set or change the Baro Transition Alert Altitude, touch the

Baro

Transition Alert

Data Field. Enter the desired altitude on the keypad, and

touch

Enter

CHANGE NAVIGATION SOURCES

Press the

Active Nav

Softkey on the PFD to change from FMS to VOR1 or

LOC1.

Press the

Active Nav

Softkey again to change from VOR1 or LOC1 to

VOR2 or LOC2.

Press the

Active Nav

Softkey a third time to return to FMS.

CHANGING THE SELECTED GPS CDI SETTING

From the

Home

Screen on the Touchscreen Controller,

touch

Utilities

Setup

Avionics Settings

Touch the

System

Tab.

Touch the

GPS CDI

Data Field.

Touch desired setting

(

2.00 NM

1.00 NM

0.30 NM

, or

AUTO

)