Garmin G500H G500H Cockpit Reference Guide - Page 47
Aux Group: System Setup - installation manual
View all Garmin G500H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
AUX GROUP: SYSTEM SETUP PAGE System Setup Page AUX GROUP Soft Keys Found on System Setup Page Setting Brightness and Mode 1) While viewing the System Setup Page of the Aux Page Group, press the small MFD knob. The LEVEL in the DISPLAY BRIGHTNESS box will flash. 2) Turn the small MFD knob to brighten or dim the display. 3) Press ENT when you reach the desired level. NOTE: When LEVEL is changed, the MODE defaults to MANUAL. If MODE is set the AUTO, the LEVEL will adjust in response to ambient light or a lighting bus, as configured during installation. Setting Airspeed References 1) While viewing the System Setup Page of the Aux Page Group, press the small MFD knob. Turn the large MFD knob to move to the desired field in the AIRSPEEDS box. 2) Turn the small MFD knob to change the speeds and to also turn the speeds ON or OFF. When the speeds are turned ON they are shown near the bottom of the Airspeed Tape if airspeed is zero. V Speed References on Airspeed Tape Airspeed References NOTE: At any time during the setting of your airspeed references, pressing the DFLT SPD soft key will restore the unit to its initial configuration. 190-01150-03 Rev B G500H Cockpit Reference Guide 37