Garmin GPSMAP 292 Owner's Manual - Page 106
Messages, Can't Read Voltages That Low, Limited To Bottom Of Range
View all Garmin GPSMAP 292 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
APPENDIX > MESSAGES Messages Accuracy Alarm-the GPS accuracy has fallen outside of user-set value. Alarm Clock-the alarm clock has sounded. Anchor Drag Alarm-you have drifted out of the specified distance range. Antenna Input is Shorted-some part of the antenna wiring is contacting the chassis. Approaching [Waypoint Name]-you are a specified alarm distance from a destination waypoint. Arriving At [Waypoint Name]-you arrived at the destination waypoint. Battery Alarm-battery voltage has fallen below the value entered in the Battery Alarm setup. Can't Read User Card-error reading card; remove and reinsert. Contact your dealer or Garmin Product Support if the problem persists. Can't Read Voltages That High, Limited To Top Of Range-the voltage value in the Battery Alarm setup is higher than the unit can read. Can't Read Voltages That Low, Limited To Bottom Of Range- voltage value in the Battery Alarm setup is lower than the voltage where the unit automatically turns off. Can't Unlock Maps-data on data card is not unlocked for the unit. Contact your dealer or Garmin Product Support. Can't Write User Card, Data Card May Be Full-error reading card; remove and reinsert. Contact your dealer or Garmin Product Support if the problem persists. Can't Write User Card, Data Card Is Read-Only-the data card in your unit contains data copy protection. Database Error-internal problem with the unit. Contact your dealer or Garmin Product Support to have the unit serviced. Deep Water Alarm-the water is deeper than the amount set in the Deep Water Alarm. Directory Item With This MMSI Already Exists-MMSI number already in DSC directory. Use a different number. Directory Memory is Full, Can't Create Entry-DSC directory has reached maximum of 100 contacts. Delete unneeded contacts to add new ones. Distress Call-a DSC distress call has been received. Take appropriate action. Drift Alarm-the depth has changed by the amount of the Drift Alarm value. Fish Alarm (not a textual alarm, is indicated by a fish bitmap flashing in the upper left part of the display)-shows an icon and a beep sounds (if enabled) when a fish is detected. This alarm does not show a message banner. 100 GPSMAP 292/298 Owner's Manual