Garmin eTrex Owner's Manual - Page 11

Getting Started The Getting Started Section introduces you to the basic operation of the eTrex. The Reference Section shows you how to use all of the eTrex's remaining features. The First Step The eTrex operates on information gathered from satellites. To gather this information, take your eTrex outside and find a large, open area that has a clear view of the sky (a nearby park would work fine). Press and hold the POWER Button to turn the unit on. You'll see the Welcome Page for a few seconds while the eTrex performs a self-test, followed by the Satellite Page. The eTrex needs to receive at least three strong satellite signals to find your location. The Satellite Page displays graphic tracking of satellites, the strength of the satellite signals, and the satellite tracking status. Here We Go. . . The Welcome Page ) NOTE: When you use the eTrex for the first time, it will take up to five minutes to find your location. After the first use, the eTrex needs only about 15 to 45 seconds to find your location. When you see the "READY TO NAVIGATE" message on the Satellite Page, the eTrex has found your location and you are ready to go! Backlighting and Contrast If the lighting conditions make it hard for you to see the screen, you can adjust the contrast or turn on the backlight. Press and release the POWER Button from any screen to turn on the backlight. The backlight is timed to stay on for 30 seconds to save battery power. To adjust the screen contrast, press the PAGE Button until you see the Satellite Page. Press the UP Button to make the screen darker, press the DOWN Button to make the screen lighter. The Satellite Page 9