Garmin zumo 665 Owner's Manual - Page 9
Step 3: Attaching the Base Plate, to the zūmo Mount, to the Handlebar Base - installation
UPC - 753759101633
View all Garmin zumo 665 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
2. Tighten the nuts to secure the base. Do not overtighten. Handlebar base U-bolt Handlebar Option B: Installing the handlebar base to the clutch/brake clamp bracket: Warning Incorrectly installing the handlebar base to the clutch/brake bracket can cause brake or clutch malfunction, which can result in damage to the vehicle and the risk of personal injury or death. Garmin strongly recommends having an experienced installer with the proper knowledge of clutch/brake systems install the unit. NOTE: Both 1/4" standard and M6 bolts are included. Match the size of the factory bolts on your clutch/brake clamp bracket. 1. Remove the two factory bolts on your clutch/brake clamp bracket. 2. Thread the new bolts through the handlebar base, spacers, and clamp bracket. 3. Tighten the bolts to secure the base. Handlebar base Clutch/brake clamp bracket Spacers Getting Started Step 3: Attaching the Base Plate to the zūmo Mount 1. Thread the M4 pan head screws through the washers, the cradle, the spacers, and the base plate. 2. Tighten the nuts to secure the base plate. Washers Cradle Base plate Pan head screws Spacers Nuts Step 4: Attaching the Base Plate to the Handlebar Base 1. Align the ball of the handlebar base and the ball of the base plate with the doublesocket arm. 2. Tighten the knob slightly. 3. Adjust for better viewing and operation. 4. Tighten the knob to secure the mount. zūmo 665 Owner's Manual