Gateway 7400 Rackmount Installation Guide - Page 11

To install the front panel assembly

Get Gateway 7400 PDF manuals and user guides View all Gateway 7400 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 11 highlights

To install the front panel assembly: 1 Remove the three screws securing the bottom panel to the server. You may find it easier to remove the hinge from the front panel assembly, attach the hinge to the server, then re-attach the front panel assembly to the hinge. 2 Move the server forward until the front edge extends slightly beyond the table or counter edge. 3 Align the front panel hinge screw holes over the bottom panel screw holes. 4 Attach the front panel hinge with the three previously removed screws. Bottom panel screws Front panel Front panel hinge Captive thumbscrews 5 Lift up the front panel, then attach the front panel to the server with the four captive thumbscrews. 6 Installation

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
6
Installation
To install the front panel assembly:
1
Remove the three screws securing the bottom panel to the server.
You may find it easier to remove the hinge from the front panel assembly,
attach the hinge to the server, then re-attach the front panel assembly
to the hinge.
2
Move the server forward until the front edge extends slightly beyond the
table or counter edge.
3
Align the front panel hinge screw holes over the bottom panel screw
holes.
4
Attach the front panel hinge with the three previously removed screws.
5
Lift up the front panel, then attach the front panel to the server with
the four captive thumbscrews.
Front panel
Bottom panel
screws
Captive
thumbscrews
Front panel
hinge