Gateway 7400 Rackmount Installation Guide - Page 9
To remove the outriggers and the feet, Remove the outrigger by pulling it up and away from the server.
 |
View all Gateway 7400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
To remove the outriggers and the feet: 1 Turn the server upside down. 2 If outriggers are installed, use your fingers or a flat-bladed screwdriver to lift up on both of the retaining latches, then slide the outrigger towards the center of the bottom panel. 3 Remove the outrigger by pulling it up and away from the server. Retaining latches Outriggers Retaining latches 4 Remove the second outrigger by repeating Steps 2 and 3. 5 Using a flat-bladed screwdriver, remove the feet. Foot 4 Installation
-
1 -
2
-
3
-
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12 -
13 -
14 -
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
 |
 |
4
Installation
To remove the outriggers and the feet:
1
Turn the server upside down.
2
If outriggers are installed, use your fingers or a flat-bladed screwdriver to
lift up on both of the retaining latches, then slide the outrigger towards
the center of the bottom panel.
3
Remove the outrigger by pulling it up and away from the server.
4
Remove the second outrigger by repeating Steps 2 and 3.
5
Using a flat-bladed screwdriver, remove the feet.
Outriggers
Retaining latches
Retaining latches
Foot