Gateway 7400 Rackmount Installation Guide - Page 17

Installing generic mounting brackets If you are installing the server in a non-Gateway cabinet, use the generic mounting brackets. These brackets allow for different cabinet depths. If generic mounting brackets are already installed in the cabinet, go to "Installing the cabinet mounting rails onto generic brackets" on page 13. To install the generic mounting brackets in the cabinet: 1 If you received a mounting template with your cabinet, use it to locate the exact position of the cabinet mounting brackets. 2 Position the front mounting bracket (shorter bracket) on the front vertical mounting rail. 3 Attach the front mounting bracket to the front vertical mounting rail using two screws from the accessory kit. If screw holes are not threaded in the front vertical mounting rail, attach the front mounting bracket by using the screws and bar nut from the accessory kit. Bar nuts Back vertical mounting rail Front vertical mounting rail Front mounting bracket Back mounting bracket 4 Position the back mounting bracket (longer bracket) on the back vertical mounting rail. 12 Installation