Gateway 7400 Rackmount Installation Guide - Page 25
Attaching the cables to the retractor, To attach the cables
![]() |
View all Gateway 7400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Attaching the cables to the retractor To attach the cables: 1 Route the cables from the rear of the system drawer to the cable retractor. 2 Attach the cables to the cable retractor, making sure the cables have sufficient slack when the system drawer is pulled forward and pushed back into place. Back vertical mounting rail Adapter bracket Cable retractor Cable 3 Route the cables to their destinations and attach as necessary. 4 If necessary, bundle any excess cable. 20 Installation
![](/manual_guide/products/gateway-computers-7400-rackmount-installation-guide-10368c3/25.png)
20
Installation
Attaching the cables to the retractor
To attach the cables:
1
Route the cables from the rear of the system drawer to the cable retractor.
2
Attach the cables to the cable retractor, making sure the cables have
sufficient slack when the system drawer is pulled forward and pushed
back into place.
3
Route the cables to their destinations and attach as necessary.
4
If necessary, bundle any excess cable.
Back vertical
mounting rail
Adapter bracket
Cable
Cable retractor