Gateway FX6800-01e 8511858 - FX-Series Hardware Reference Guide (for Windows V - Page 56
on the memory module bank, then press the module
UPC - 884483304356
View all Gateway FX6800-01e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
CHAPTER 1: Upgrading Your Computer 3 Find the memory module banks on your system board. Channel B slot 1 Channel B slot 0 Channel A slot 1 Channel A slot 0 4 If you are removing a DIMM from the memory module bank, gently pull the plastic tabs away from the sides of the memory module and remove it. - OR If you are adding a DIMM to an empty memory module bank, gently pull the plastic tabs away from the sides of the memory module bank. Make sure that you install modules of the same type into both slots of a memory channel (bank). 5 Align the notches on the new DIMM with the notches on the memory module bank, then press the module firmly into the bank. The tabs on the sides of the memory module should secure the memory module automatically. When the module is secure, you hear a click. 6 Return your computer to its upright position. 50