GE 600-1054-95R User Manual - Page 40
Security, Phone numbers
UPC - 782136719161
View all GE 600-1054-95R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
32 Simon XT User Manual 5. Enter a new code (use correct length), then press Enter. 6. Press Status repeatedly to exit. Initially, all user codes are blank. A user code can be deleted by pressing Disarm while the code is being changed. Duress code. The duress code, when used in place of another user code, generates a silent duress alarm which is reported to the central monitoring station. To change the duress code: 1. Enter the System programming menu. 2. Scroll up/down to Access codes, then press Enter. 3. Scroll up/down to Duress code, then press Enter. 4. The current value of the code now flashes. 5. Enter a new code (use correct length), then press Enter. 6. Press Status repeatedly to exit. Initially, the duress code is blank. The duress code can be deleted by pressing Disarm while the code is being changed. Security The Security menu contains the Download Enable option. This option determines whether your dealer can access the system remotely. To program the Download enable option: 1. Enter the System programming menu. 2. Scroll up/down to Security, then press Enter. 3. Scroll up/down to Download enable, then press Enter. 4. The current value of this option now flashes On/off. 5. Scroll up/down to the desired value, then press Enter. 6. Press STATUS repeatedly to exit. Phone numbers Phone #4 is the only system phone number that you can change. Therefore, it is often used for voice reporting of alarms to your phone, if it was programmed for this purpose by the installer. To change Phone #4: 1. Enter the System programming menu. 2. Scroll up/down to Phone #s, then press Enter. 3. Scroll up/down to Phone #4, then press Enter.