GE JN328KSA Installation Instructions - Page 9

INSTALLATION INSTRUCTIONS Installation Instructions DAMAGE - SHIPMENT/INSTALLATION • If the unit is damaged in shipment, return the unit to the store in which it was bought for repair or replacement. • If the unit is damaged by the customer, repair or replacement is the responsibility of the customer. • If the unit is damaged by the installer (if other than the customer), repair or replacement must be made by arrangement between customer and installer. MOUNTING SPACE 24s,30s or 36s to match cooktop width Bottom edge of cabinet needs to be 30s or more from the cooking surface 30s min. 66s or more from the floor to the top of the hood NOTES: • Hood width may be greater than the width of the range or cooktop, but it may not be smaller. • Ensure the range or cooktop is installed per manufacturer's installation instructions. • If you are going to vent your range hood to the outside, see the "Ducting Requirements" section for exhaust duct preparation. TOOLS YOU WILL NEED Flat-blade and Phillips screwdrivers Pencil Duct tape Saw (saber or keyhole) Electric drill Metal snips (in some applications) 1/4s pivoting hex socket Pliers Tape measure Wire stripper Flashlight Caulking Level 1/4s Nutdriver PARTS INCLUDED PART QUANTITY Grease Filter only (JV338) 1 Charcoal Filter only (JN327, JN328 and RN328) 1 Grease Filter and Charcoal Filter (JV24X, JV347, JV348, 2 JV367 and AV447) Mounting Screws (8 - 18" x 3/4" Phillips pan 4 head) Exhaust Adaptor (for 3 1/4" x 10" rect. 1 venting) Exhaust Adaptor Screw (8 - 18" x 3/8" Phillips pan 1 head or hex head) 49-80589-6 9