GE PDT760SSJSS Installation Instructions - Page 15
Step 23: Replace Toekick, Step 25: Literature, Step 24: Check The Following
View all GE PDT760SSJSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Dishwasher Installation STEP 23: REPLACE TOEKICK • Place toekick against the pre-toekick (on some models) and legs of the dishwasher. Toekick Figure AH Attachment Screws • Align the toekick with the bottom edge and make sure it is DJDLQVWWKHÀRRU • Insert and tighten the 2 toekick attachment screws. The WRHNLFNVKRXOGVWD\LQFRQWDFWZLWKWKHÀRRU • When reinstalling the toe kick on models with a sound barrier, ensure that the bottom edge of the rubberized flap is flush with the floor. Any excess material should be tucked up behind the outer door. Do not allow excess rubberized flap to lay on the floor. If any excess is not tucked completely behind the outer door, it will bunch up between the door and toe kick and impede proper opening and closing of the door. This will be noticeable because the door will not stay fully open and will spring up. Tip: Reduce sound from under the dishwasher. Make sure toekick is against floor. STEP 24: CHECK THE FOLLOWING • Tub trim does not interfere with the door • Dishwasher is square and level at both the top and bottom of the cabinet opening, with no twisting or distortion of the tub or door $OOOHJVRIWKHGLVKZDVKHUDUH¿UPO\LQFRQWDFWZLWKWKHÀRRU • Drain hose is not pinched between the dishwasher and DGMDFHQWFDELQHWVRUZDOOV 7XEWULPLVIXOO\VHDWHGRQWKHWXEÀDQJH STEP 25: LITERATURE • Be sure to leave complete literature package, these Installation Instructions and product samples and/or coupons with the consumer. 15