GE PDT760SSJSS Installation Instructions - Page 2

Installation Preparation PARTS SUPPLIED IN INSTALLATION PACKAGE: • Junction box cover and #10 hex-head screw • Hose clamp Junction Box Cover • Drain hose (approximately 78" long) • Drain hose hanger • 2 #8-18 hex head screws to secure brackets to washer tub frame #10 Hex-Head Junction Box Screw 1/2" long Hose Clamp Drain Hose Drain Hose Hanger #8 Hex-Head Mounting Bracket Screws • 1 top trim piece (on some models) • 2 side trim pieces • 2 mounting brackets for wood countertops or side cabinets Top Trim Piece (on some models) Side Trim Pieces • 2 #8-18 x 5/8" Phillips special head screws, to secure dishwasher to underside of countertop or to side cabinets • Literature, samples and/or coupons Mounting Brackets #8 Phillips Special Head Screws 5/8" long Plug Buttons Literature MATERIALS YOU WILL NEED: • 90° elbow (3/4"hose internal thread on one end, opposite end sized to fit water supply) • UL-listed wire nuts (3) • Masking Tape Materials Needed for New Installations: • Air gap for drain hose, if required • Waste tee for house plumbing, if applicable • Electrical cable or power cord depending on your model, quick connect power cords are availble. • Screw-type hose clamps • Strain relief for electrical connection • Hand shut-off valve (recommended) • Hot Water Line-3/8" minimum, copper tubing (including ferrule, compression nut) or GE Part # WX28X326, flexible braided hose. • WD24X10065 drain hose (12' long), if needed 90°Elbow Wire Nuts (3) Masking Tape (if applicable) Coupler for optional drain hose Air Gap Waste Tee Electrical Cable (or Power Cord, if applicable) Hose Clamps Strain Relief Hand 6KXW2ȹ Valve Hot Water Line Optional 12' Drain Hose WD24X10065 TOOLS YOU WILL NEED: • Phillips-head screwdriver • 1/4" and 5/16" nutdriver • $GMXVWDEOHZUHQFK • Level Phillips-Head Screwdriver • Carpenter's square • Measuring tape • Safety glasses • Flashlight 15/16" Socket • %XFNHWWRFDWFKZDWHUZKHQÀXVKLQJWKHOLQH • 15/16" socket (optional for skid removal) • Gloves • Pliers For New Installations Only: Flashlight • Tubing cutter • Drill and appropriate bits • Hole saw set 2 Gloves 1/4" and 5/16" Nutdriver Level Carpenter's Square Pliers 6" Adjustable Wrench Tubing Cutter Safety Glasses Measuring Tape Bucket Hole Saw Set Drill and Bits