GE PSB48YSXSS Use and Care Manual - Page 37
Install Door Panels, With Pre-installed Handles - dimensions
UPC - 084691175933
View all GE PSB48YSXSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Installation Instructions 11 INSTALL DOOR PANELS WITH PRE-INSTALLED HANDLES Handle Fresh Food Refrigerator Door 3/4" Custom Panel if Required Install 1/4″ Decorative Panels: • Remove Handles Open door to 90°. Remove 5 Phillips head screws from the Fresh Food and Freezer door handles; retain all screws. Lift off door handles. • Install Door Panels NOTE: Carefully push the Fresh Food panel in until it slides into the slot behind the trim. Gently push to opposite side. Repeat procedure for upper and lower Freezer panels. • Reinstall Handles Reinstall Fresh Food door handle with the original 5 Phillips head screws. Tighten. Repeat for Freezer door handle. NOTE: Ensure that the edge of the handle does not pinch the door gasket. • 3/4″ Custom Decorative Panels If you choose to install custom wood panels, they must be cut to dimensions shown on pages 23-30. The panels will slide into the frame on the doors and grille. IMPORTANT NOTE: Maximum custom panel thickness must not exceed 1-1/8″ thick and 70 lbs for the Fresh Food door, 45 lbs total for the Freezer door and 15 lbs for the Grille panel. 37