Gigabyte GA-8I945PL-G Manual - Page 17

Step 3: If Setup correctly recognizes the driver in the floppy disk, a controller menu will appear. If you want to install Windows XP, use the UP or DOWN ARROW key to select ITE IT8212 ATA RAID Controller (Windows 2000/XP)* (Figure 22) and press ENTER. Then it will begin to load the driver from the floppy disk. Figure 22 If a message appears saying one or some file(s) cannot be found, please check the floppy disk or copy the correct GigaRAID controller driver again from the motherboard driver CD. Step 4: When the screen as shown below appears, press ENTER to continue the driver installation from the floppy disk. The driver installation will be finished in about one minute. Figure 23 "*" Select the driver according to which of the following operating systems you want to install: Windows XP, Windows 2000, or Windows NT. - 17 - IDE RAID Drives Configuration (GigaRAID)