Gigabyte GA-965GM-S2 Manual - Page 35
HDD S.M.A.R.T. Capability
UPC - 818313003126
View all Gigabyte GA-965GM-S2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
English HDD S.M.A.R.T. Capability This feature allows your hard disk to report read/write errors and to issue warnings when thirdparty hardware monitor utility is installed. Enabled Disabled Enable HDD S.M.A.R.T. capability. Disable HDD S.M.A.R.T. capability. (Default value) CPU Hyper-Threading (Note) Enabled Enable CPU Hyper Threading Feature. Please note that this feature is only working for operating system with multi processors mode supported. Disabled (Default value) Disable CPU Hyper Threading. Limit CPUID Max. to 3 (Note) Enabled Disabled Limit CPUID Maximum value to 3 when use older OS like NT4. Disable CPUID Limit for windows XP. (Default value) No-Execute Memory Protect (Note) Enabled Disabled Enable No-Execute Memory Protect function. (Default value) Disable No-Execute Memory Protect function. CPU Enhanced Halt (C1E) (Note) Enabled Disabled Enable CPU Enhanced Halt (C1E) function. (Default value) Disable CPU Enhanced Halt (C1E) function. CPU Thermal Monitor 2 (TM2) (Note) Enabled Disabled Enable CPU Thermal Monitor 2 (TM2) function. (Default value) Disable CPU Thermal Monitor 2 (TM2) function. CPU EIST Function (Note) Enabled Disabled Enable CPU EIST function. (Default value) Disable EIST function. Virtualization Technology (Note) Enabled Enable Virtualization Technology. (Default value) Disabled Disable this function. Init Display First This feature allows you to select the first initiation of the monitor display from which card when you install a PCI card and a PCI Express VGA card on the motherboard. PEG Set Init display first to PCI Express VGA card. PCI Onboard Set Init display first to PCI. (Default value) Set Init display first to Onboard VGA. Onboard VGA Enable If No Ext PEG Output from the onboard GPU when no PCI Express VGA card is installed. (Default value) Always Enable Always output from the onboard GPU. On-Chip Frame Buffer Size 1MB Set on-chip frame buffer size to 1MB. 8MB Set on-chip frame buffer size to 8MB. (Default value) (Note) This item will show up when you install a processor which supports this function. - 35 - BIOS Setup