Gigabyte GA-965GM-S2 Manual - Page 67

A. Create Array

Get Gigabyte GA-965GM-S2 PDF manuals and user guides
UPC - 818313003126
View all Gigabyte GA-965GM-S2 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 67 highlights

English A. Create Array: In the main screen, press ENTER on the Create RAID Disk Drive item. Then the RAID creation screen appears (Figure 5). GIGA-BYTE Technology Corp. PCIE-to-SATAII/IDE RAID Controller BIOS V1.06.53 [ Create New RAID ] [ Hard Disk Drive List ] Name: Level: Disks: Block: Size: JRAID 0-Stripe Select Disk 128KB 240GB Mode Name HDD0: ST3120026AS HDD1: ST3120026AS Available 120 GB 120 GB Type/Status Non-RAID Non-RAID Confirm Creation [ RAID Disk Drive List ] [ Help ] Enter RAID Name Enter a string between 1 to 16 characters in length for the created RAID drive to be identified by system BIOS or OS. [ ]-Move Cursor [DEL,BS]-Delete Character [ENTER]-Next [ESC]-Abort Figure 5 In the RAID creation screen, the Create New RAID block displays all the items that need to be set for creating an array (Figure 5). The following procedure uses RAID 0 creation as an example. Steps: 1. Enter Array Name: Under the Name item, enter an array name with 1~16 letters (letters cannot be special characters) and press ENTER. 2. Select RAID Mode: Under the Level item, use UP or DOWN ARROW key to select RAID 0 (Stripe), RAID 1 (Mirror), or JBOD (Figure 6). Then press ENTER to move onto the next step. GIGA-BYTE Technology Corp. PCIE-to-SATAII/IDE RAID Controller BIOS V1.06.53 [ Create New RAID ] [ Hard Disk Drive List ] Name: Level: Disks: Block: Size: JRAID 0-Stripe Select Disk 128KB 240GB Mode Name HDD0: ST3120026AS HDD1: ST3120026AS Available 120 GB 120 GB Type/Status Non-RAID Non-RAID Confirm Creation [ RAID Disk Drive List ] [ Help ] Select RAID Level RAID 0 RAID 1 JBOD - Data striped for performance Data mirrored for redundancy Data concatenated for huge temporarily disk required [ ]-Switch RAID Level [ENTER]-Next Figure 6 - 67 - [ESC]-Abort Appendix

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
Appendix
- 67 -
English
Figure 6
A. Create Array:
In the main screen, press ENTER on the
Create RAID Disk Drive
item. Then the RAID creation screen
appears (Figure 5).
GIGA-BYTE Technology Corp. PCIE-to-SATAII/IDE RAID Controller BIOS V1.06.53
[ Create New RAID ]
Name:
JRAID
Level:
0-Stripe
Disks:
Select Disk
Block:
128KB
Size:
240GB
Confirm Creation
[ RAID Disk Drive List ]
[
IJ
]-Move Cursor
[DEL,BS]-Delete Character
[ENTER]-Next
[ESC]-Abort
[ Hard Disk Drive List ]
Mode Name
Available
Type/Status
HDD0:
ST3120026AS
120 GB
Non-RAID
HDD1:
ST3120026AS
120 GB
Non-RAID
[ Help ]
Enter RAID Name
Enter a string between 1 to 16 characters
in length for the created RAID drive to be
identified by system BIOS or OS.
Figure 5
GIGA-BYTE Technology Corp. PCIE-to-SATAII/IDE RAID Controller BIOS V1.06.53
[ Create New RAID ]
Name:
JRAID
Level:
0-Stripe
Disks:
Select Disk
Block:
128KB
Size:
240GB
Confirm Creation
[ RAID Disk Drive List ]
[
KL
]-Switch RAID Level
[ENTER]-Next
[ESC]-Abort
[ Hard Disk Drive List ]
Mode Name
Available
Type/Status
HDD0:
ST3120026AS
120 GB
Non-RAID
HDD1:
ST3120026AS
120 GB
Non-RAID
[ Help ]
Select RAID Level
RAID 0
-
Data striped for performance
RAID 1
-
Data mirrored for redundancy
JBOD
-
Data concatenated for huge
temporarily disk required
In the RAID creation screen,
the
Create New RAID
block displays all the items that need to be set for
creating an array (Figure 5). The following procedure uses RAID 0 creation as an example.
Steps:
1. Enter Array Name:
Under the
Name
item, enter an array name with 1~16 letters (letters cannot be
special characters) and press ENTER.
2. Select RAID Mode:
Under the
Level
item, use UP or DOWN ARROW key to select RAID 0 (Stripe),
RAID 1 (Mirror), or JBOD (Figure 6). Then press ENTER to move onto the next step.