Gigabyte GA-965P-DS3 Manual - Page 40

English Onboard LAN Boot ROM This function decide whether to invoke the boot ROM of the onboard LAN chip. Disabled Enabled Disable this function. (Default value) Enable this function. Onboard SATA/IDE Device This function allows users to enable or disable the SATA/IDE ports controlled by the GIGABYTE SATA2 controller. Enabled Enable this function. (Default value) Disabled Disable this function. Onboard SATA/IDE Ctrl Mode This function allows users to decide the operating mode of the SATA ports controlled by the GIGABYTE SATA2 controller. IDE Set the SATA channel to IDE mode.(Default value) AHCI Set the SATA channel to AHCI mode. Advanced Host Controller Inter- face (AHCI) is an interface specification that allows the storage driver to enable advanced Serial ATA features such as Native Command Queu- ing and hot plug. For more details about AHCI, please visit Intel's website. RAID/IDE Set the SATA channel to RAID mode and IDE channel to IDE mode. Onboard Serial Port 1 Auto BIOS will automatically setup the port 1 address. 3F8/IRQ4 Enable onboard Serial port 1 and address is 3F8/IRQ4. (Default value) 2F8/IRQ3 Enable onboard Serial port 1 and address is 2F8/IRQ3. 3E8/IRQ4 2E8/IRQ3 Enable onboard Serial port 1 and address is 3E8/IRQ4. Enable onboard Serial port 1 and address is 2E8/IRQ3. Onboard Parallel Port Disabled Disable onboard LPT port. 378/IRQ7 278/IRQ5 Enable onboard LPT port and address is 378/IRQ7. (Default value) Enable onboard LPT port and address is 278/IRQ5. 3BC/IRQ7 Enable onboard LPT port and address is 3BC/IRQ7. Parallel Port Mode SPP Using Parallel port as Standard Parallel Port. (Default value) EPP Using Parallel port as Enhanced Parallel Port. ECP Using Parallel port as Extended Capabilities Port. ECP+EPP Using Parallel port as ECP & EPP mode. GA-965P-DS3/S3 Motherboard - 40 -