Gigabyte GA-Z170X-Gaming GT User Manual - Page 31
M2D_32G/M2H_32G M.2 Socket 3 Connectors
![]() |
View all Gigabyte GA-Z170X-Gaming GT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
_ _B _ _B _ B S_ 10) MB2D_32G/M2H_32G (M.2 Socket 3 ConBnectors) The M.2 connectors support M.2 SATA SSDs and M.2 PCIe SSDs and support RAID configuration through the Intel® Chipset. Please note that an M.2 PCIe SSD cannot be used to create a RAID set either with an M.2 SATA SSD or a SATA hard drive. To create a RAID array with an M.2 PCIe SSD, you must set SuoB_pn_BBtchoenfcigounrfiignugraatRioAnIiDn UEFI BIOS array. mode. RB eSf_er B to Chapter 3, "Configuring a RAID Set," for instructions S S S B__B S S_ _ B 80D 60D 42D _S 80H 60H 42H _U S__ F _B B Follow the steps below to correctly install an M.2 SSD in the M.2 connector. F_USB3 F _U _ F B _0 M2D_32G S S M2H_32G F_USB3 F Step 1: Use a screw driver to unfasten the screw and nut from the motherboard. Locate the proper mounting hole for the M.2 SSD to be installed and then screw the nut first. _0 _F Step 2: Slide the M.2 SSD into the connector at an angle. _F _0 F _0 F Step 3: Press the M.2 SSD down and then secure it with the screw. Step 4: The installation is completed, as shown in the picture above. Select the proper hole for the M.2 SSD to be installed and refasten the screw and nut. - 31 - Hardware Installation
![](/manual_guide/products/gigabyte-gaz170xgaming-gt-user-manual-66e2cc0/31.png)