Gigabyte GA-Z270X-DESIGNARE Users Manual - Page 29

Fan Control Use Temperature Input, Fan/Pump Control Mode

Get Gigabyte GA-Z270X-DESIGNARE PDF manuals and user guides View all Gigabyte GA-Z270X-DESIGNARE manuals
Add to My Manuals
Save this manual to your list of manuals

Page 29 highlights

`` Smart Fan 5 Settings && Monitor Allows you to select a target to monitor and to make further adjustment. (Default: CPU FAN) && Fan Speed Control Allows you to determine whether to enable the fan speed control function and adjust the fan speed. Normal Allows the fan to run at different speeds according to the temperature. You can adjust the fan speed with System Information Viewer based on your system requirements. (Default) Silent Allows the fan to run at slow speeds. Manual Allows you to control the fan speed in the curve graph. Full Speed Allows the fan to run at full speeds. && Fan Control Use Temperature Input Allows you to select the reference temperature for fan speed control. && Temperature Interval Allows you to select the temperature interval for fan speed change. && Fan/Pump Control Mode Auto Lets the BIOS automatically detect the type of fan/pump installed and sets the optimal control mode. (Default) Voltage Voltage mode is recommended for a 3-pin fan/pump. PWM PWM mode is recommended for a 4-pin fan/pump. && Temperature Displays the current temperature of the selected target area. && Fan Speed Displays current fan/pump speeds. && Temperature Warning Control Sets the warning threshold for temperature. When temperature exceeds the threshold, BIOS will emit warning sound. Options are: Disabled (default), 60oC/140oF, 70oC/158oF, 80oC/176oF, 90oC/194oF. && Fan/Pump Fail Warning Allows the system to emit warning sound if the fan/pump is not connected or fails. Check the fan/pump condition or fan/pump connection when this occurs. (Default: Disabled) - 29 -

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
`
Smart Fan 5 Settings
&
Monitor
Allows you to select a target to monitor and to make further adjustment. (Default: CPU FAN)
&
Fan Speed Control
Allows you to determine whether to enable the fan speed control function and adjust the fan speed.
±
Normal
Allows the fan to run at different speeds according to the temperature. You can adjust
the fan speed with System Information Viewer based on your system requirements.
(Default)
±
Silent
Allows the fan to run at slow speeds.
±
Manual
Allows you to control the fan speed in the curve graph.
±
Full Speed
Allows the fan to run at full speeds.
&
Fan Control Use Temperature Input
Allows you to select the reference temperature for fan speed control.
&
Temperature Interval
Allows you to select the temperature interval for fan speed change.
&
Fan/Pump Control Mode
±
Auto
Lets the BIOS automatically detect the type of fan/pump installed and sets the optimal
control mode. (Default)
±
Voltage
Voltage mode is recommended for a 3-pin fan/pump.
±
PWM
PWM mode is recommended for a 4-pin fan/pump.
&
Temperature
Displays the current temperature of the selected target area.
&
Fan Speed
Displays current fan/pump speeds.
&
Temperature Warning Control
Sets the warning threshold for temperature. When temperature exceeds the threshold, BIOS will emit
warning sound. Options are: Disabled (default), 60
o
C/140
o
F, 70
o
C/158
o
F, 80
o
C/176
o
F, 90
o
C/194
o
F.
&
Fan/Pump Fail Warning
Allows the system to emit warning sound if the fan/pump is not connected or fails. Check the fan/pump
condition or fan/pump connection when this occurs. (Default: Disabled)
- 29 -