Gigabyte J4005N D2P User Manual - Page 24

&& Hard Drive/CD/DVD ROM Drive/Floppy Drive/Network Device BBS Priorities Specifies the boot order for a specific device type, such as hard drives, optical drives, floppy disk drives, and devices that support Boot from LAN function, etc. Press on this item to enter the submenu that presents the devices of the same type that are connected. This item is present only if at least one device for this type is installed. && Fast Boot Enables or disables Fast Boot to shorten the OS boot process. (Default: Disabled) && SATA Support All Sata Devices All SATA devices are functional in the operating system and during the POST. (Default) Last Boot HDD Only Except for the previous boot drive, all SATA devices are disabled before the OS boot process completes. This item is configurable only when Fast Boot is set to Enabled. && VGA Support Allows you to select which type of operating system to boot. Auto Enables legacy option ROM only. EFI Driver Enables EFI option ROM. (Default) This item is configurable only when Fast Boot is set to Enabled. && USB Support Disable All USB devices are disabled before the OS boot process completes. Full Initial All USB devices are functional in the operating system and during the POST. Partial Initial Part of the USB devices are disabled before the OS boot process completes. (Default) This item is configurable only when Fast Boot is set to Enabled. && NetWork Stack Driver Support Disable Disables booting from the network. (Default) Enable Enables booting from the network. This item is configurable only when Fast Boot is set to Enabled. && New Boot Option Policy Allows you to determine whether to change the boot order when a new device is added. Dedault Keeps the previous boot order settings. (Default) Place First Set the newly added device as the first boot device. Place Last Set the newly added device as the last boot device. - 24 -