Gigabyte J4005N D2P User Manual - Page 6
Product Specifications, Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules operate - front panel
View all Gigabyte J4005N D2P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
1-2 Product Specifications CPU Memory Onboard Graphics Audio Built in with an Intel® Dual-Core Celeron® J4005 SoC (2.7 GHz) * Do not disassemble the onboard SoC and the heatsinks by yourself to avoid damage to these components. 4 MB Cache 2 x DDR4 DIMM sockets supporting up to 16 GB of system memory Dual channel memory architecture Support for DDR4 2400/2133 MHz memory modules Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode) Support for Extreme Memory Profile (XMP) memory modules (Go to GIGABYTE's website for the latest supported memory speeds and memory modules.) Integrated in the SoC: - 1 x D-Sub port, supporting a maximum resolution of 1920x1080@60 Hz - 1 x HDMI port, supporting a maximum resolution of 4096x2160@60 Hz * Support for HDMI 2.0 version and HDCP 2.2. Realtek® ALC887 codec High Definition Audio 2/4/5.1/7.1-channel * To configure 7.1-channel audio, you have to use an HD front panel audio module and enable the multi-channel audio feature through the audio driver. LAN Realtek® GbE LAN chip (10/100/1000 Mbit) Expansion Slots Storage Interface USB Internal Connectors 1 x PCI Express x16 slot, running at x1 (The PCIEX16 slot conforms to PCI Express 2.0 standard.) 1 x M.2 Socket 1 connector for the wireless communication module (CNVI WIFI-BRACKET) Integrated in the SoC: - 1 x M.2 connector (Socket 3, M key, type 2242/2260/2280 SATA and PCIe x2 SSD support) - 2 x SATA 6Gb/s connectors Integrated in the SoC: - 4 x USB 3.1 Gen 1 ports on the back panel - 4 x USB 2.0/1.1 ports available through the internal USB header 1 x 24-pin ATX main power connector 1 x 4-pin ATX 12V power connector 2 x SATA 6Gb/s connectors 1 x CPU fan header 1 x system fan header 1 x M.2 Socket 3 connector 1 x front panel header 1 x front panel audio header 2 x USB 2.0/1.1 headers 1 x serial port header 1 x Trusted Platform Module (TPM) header (2x6 pin, for the GC-TPM2.0_S module only) 1 x Clear CMOS jumper - 6 -