Gigabyte WRX80-SU8-IPMI User Manual
Gigabyte WRX80-SU8-IPMI Manual
 |
View all Gigabyte WRX80-SU8-IPMI manuals
Add to My Manuals
Save this manual to your list of manuals |
Gigabyte WRX80-SU8-IPMI manual content summary:
- Gigabyte WRX80-SU8-IPMI | User Manual - Page 1
GA-WRX80-SU8-IPMI User's Manual Rev. 1001 - Gigabyte WRX80-SU8-IPMI | User Manual - Page 2
- Gigabyte WRX80-SU8-IPMI | User Manual - Page 3
respective owners. Disclaimer Information in this manual is protected by copyright laws and is the property of GIGABYTE. Changes to the specifications and features in this manual may be made by GIGABYTE without prior notice. No part of this manual may be reproduced, copied, translated, transmitted - Gigabyte WRX80-SU8-IPMI | User Manual - Page 4
Layout 5 GA-WRX80-SU8-IPMI Motherboard Block Diagram 7 Chapter 1 Hardware Installation 8 1-1 Installation Precautions 8 1-2 Product Specifications 9 1-3 Installing the CPU 11 1-4 Installing the Memory 12 1-5 Back Panel Connectors 13 1-6 Internal Connectors 15 Chapter 2 BIOS Setup 25 - Gigabyte WRX80-SU8-IPMI | User Manual - Page 5
GA-WRX80-SU8-IPMI Motherboard Layout 21 28 35 19 3 4 5 6 7 30 11 12 13 16 29 10 34 32 24 15 27 17 31 33 26 25 8 9 23 14 - Gigabyte WRX80-SU8-IPMI | User Manual - Page 6
Box Contents 55 GA-WRX80-SU8-IPMI motherboard 55 Motherboard driver disc 55 Four SATA cables 55 Quick Installation Guide 55 I/O Shield - 6 - - Gigabyte WRX80-SU8-IPMI | User Manual - Page 7
GA-WRX80-SU8-IPMI Motherboard Block Diagram 6ORW 3&,H[ 6ORW 3&,H[ 6ORW 3&,H[ 6ORW 3&,H[ 6ORW 3&,H[ 6ORW 3&,H[ 6ORW 3&,H[ *E(/$1 3&,H*HQ 6RFNHW63 ,QWHOŠ ; 3&,H*HQ[ 06RFNHW 3&,H6$7$ 3&,H*HQ[ 6$7$*3,2 &KDQQHO - Gigabyte WRX80-SU8-IPMI | User Manual - Page 8
(ESD). Prior to installation, carefully read the user's manual and follow these procedures: •• Prior to installation, make sure the user. •• If you are uncertain about any installation steps or have a problem related to the use of the product, please consult a certified computer technician. - Gigabyte WRX80-SU8-IPMI | User Manual - Page 9
CPU ŠŠ AMD Ryzen™ Threadripper™ PRO 3000WX (up to 64C) ŠŠ Single sWRX8 4094 socket; CPU TDP supports up to 280W Chipset ŠŠ AMD WRX80 Chipset Memory ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ Onboard Graphics ŠŠ Audio ŠŠ ŠŠ ŠŠ ŠŠ LAN ŠŠ ŠŠ Expansion Slots ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ Storage Interface - Gigabyte WRX80-SU8-IPMI | User Manual - Page 10
Fan speed control * Whether the fan speed control function is supported will depend on the fan you install. ŠŠ Operating temperature: ; 30.5cm x 26.7cm Operating System ŠŠ Windows 10 ŠŠ Linux * GIGABYTE reserves the right to make any changes to the product specifications and product-related - Gigabyte WRX80-SU8-IPMI | User Manual - Page 11
1-3 Installing the CPU Read the following guidelines before you begin to install the CPU: •• Make sure that the motherboard supports the CPU. •• Always turn off the computer and unplug the power cord from the power outlet before installing the CPU to prevent hardware damage. •• Locate - Gigabyte WRX80-SU8-IPMI | User Manual - Page 12
brand, speed, and chips be used. (Go to GIGABYTE's website for the latest supported memory speeds and memory modules.) •• Always turn off the Channel Memory Configuration This motherboard supports 8 Channel Technology. After the memory is installed, the BIOS will automatically detect the - Gigabyte WRX80-SU8-IPMI | User Manual - Page 13
Use this port to connect devices such as a mouse, modem or other peripherals. USB 3.2 Gen 2 Type-A Port (Red) The USB 3.2 Gen 2 Type-A port supports the USB 3.2 Gen 2 specification and is compatible to the USB 3.2 Gen 1 and USB 2.0 specification. Use this port for USB devices. USB Type-C® Port The - Gigabyte WRX80-SU8-IPMI | User Manual - Page 14
this audio jack for line in devices such as an optical drive, walkman, etc. Line Out/Front Speaker Out The line out jack. This jack supports audio amplifying function. For better sound quality, it is recommended that you connect your headphone/speaker to this jack (actual effects may vary by the - Gigabyte WRX80-SU8-IPMI | User Manual - Page 15
1-6 Internal Connectors 21 28 35 19 19 3 4 5 6 7 30 11 12 13 16 29 10 15 18 27 34 32 24 17 31 33 26 25 8 9 23 14 20 22 21 19 1 BMC_VGA 2 BMC_WATCHD 3 COM2 4 SMB_IPMB 5 I_SGPIO1 6 I_SGPIO2 7 TPM 8 SL_CN1/CN2 9 SL_CN3 10 FUSB30_1/2 11 FUSB2 12 F_USB32C 13 USB30V 14 PMBUS 15 CLR_CMOS - Gigabyte WRX80-SU8-IPMI | User Manual - Page 16
1) BMC_VGA 1 Pin Definition 1-2 Enable (Default) 2-3 Disable 2) BMC_WATCHD 1 Pin Definition 1-2 Enable 2-3 Disable (Default) 3) COM2 (Serial Port Header) 10 9 21 Pin Definition 1 NDCD3 NSOUT 5 GND 7 NRTS9 NRI- Pin Definition 2 NSIN 4 NDTR6 NDSR8 NCTS10 - 4) SMB_IPMB 1 Pin Definition 1 - Gigabyte WRX80-SU8-IPMI | User Manual - Page 17
5) I_SGPIO1 (For SATA_0_1) 6) I_SGPIO2 (For SATA_2_3) 1 2 7 8 Pin Definition 1 NA 3 SATA_DATA 5 GND 7 NA Pin Definition 24 GND 6 SATA_LOAD 8 SATA_CLK 7) TPM (Trusted Platform Module/Port 80 Header) 1 2 11 12 Pin Definition 1 LPC_IO0 3 LPC_IO1 5 LPC_IO2 7 LPC_IO3 9 LFRAME# 11 SERIRQ Pin - Gigabyte WRX80-SU8-IPMI | User Manual - Page 18
9) SL_CN3 B1 B19 A1 A19 A1 A19 B1 B19 Pin Definition B1 GND B2 Tx0+ B3 Tx0B4 GND B5 Tx1+ B6 Tx1B7 GND B8 SB0 B9 SB1 B10 SB8 B11 SB2 B12 SB6 B13 GND B14 Tx2+ B15 Tx2B16 GND B17 Tx3+ B18 Tx3B19 GND Pin Definition A1 GND A2 Rx0+ A3 Rx0A4 GND A5 Rx1+ A6 Rx1A7 GND A8 SB7 A9 SB3 A10 SB9 A11 SB4 - Gigabyte WRX80-SU8-IPMI | User Manual - Page 19
(5V) 3 USB DX5 USB DX+ 7 GND 9- Pin Definition 2 Power (5V) 4 USB DY6 USB DY+ 8 GND 10 NC 12) F_USB32C (USB Type-C® Header with USB 3.2 Gen 2 Support) 20 1 11 10 Pin Definition 1 VBUS 2 TX1+ 3 TX14 GND 5 RX1+ 6 RX17 VBUS 8 CC1 9 SBU1 10 SBU2 Pin Definition 11 VBUS 12 TX2+ 13 TX214 GND - Gigabyte WRX80-SU8-IPMI | User Manual - Page 20
15) CLR_CMOS 1 Pin Definition 1-2 NA (Default) 2-3 Clear CMOS 16) CI 1 Pin Definition 1 Intrusion Input 2 GND 17) F_PANEL 2 24 1 23 Pin Definition 1 Power LED+ 35 Power LED7 HDD LED+ 9 HDD LED1 11 Power Button 13 GND 15 Reset Button 17 GND 19 ID Button 21 GND 23 NMI Switch Pin Definition 2 - Gigabyte WRX80-SU8-IPMI | User Manual - Page 21
18) CPU_FAN1 19) SYS_FAN1~6 1 Pin Definition 1 GND 2 P12V 3 FAN_TACH 4 FAN_PWM 20/21) ATX_CPU/ATX_PCIE (2x4, 12V Power Connectors) ATX_CPU ATX_CPU ATX_PCIE ATX_PCIE 8 5 1 4 4 1 ATX_CPU 5 8 ATX_PCIE 22) ATX (2x12 Main Power Connector) 1 12 13 24 - 21 - - Gigabyte WRX80-SU8-IPMI | User Manual - Page 22
23/24) P_X4_M2_A/P_X4_M2_B (M.2 Socket 3 Connectors) 80 40 80 P_X4_M2_B 40 P_X4_M2_A 25/26) SATA_0_1/SATA_2_3 (SATA 6Gb/s Connectors) G.QBOFM G.QBOFM SATA3 SATA2 SATA1 SATA0 27) BAT - 22 - - Gigabyte WRX80-SU8-IPMI | User Manual - Page 23
28) F_AUDIO 10 9 2 1 Pin Definition 1 MIC2_L 3 MIC2_R 5 LINE2_R 7 FAUDIO_JD 9 LINE2_L Pin Definition 2 GND 4 NC 6 Sense 8 No Pin 10 Sense 29) SPEAKER 1 Pin Definition 1 5V 2 NA 3 NA 4 SPK- 30) TBT (Thunderbolt™ Pin Header) 1 Pin Definition 1 FORCE_POWER 2 SCI_EVENT 3 SLP_S3 4 SLP_S4 - Gigabyte WRX80-SU8-IPMI | User Manual - Page 24
31) PWR_SW (Power Button) 32) RST_SW (Reset Button) 33) QF_SW (Q-Flash Plus Button) PWR_SW QF_SW RST_SW 34) F_LED1 (Onboard Power LED) State Solid Red Solid Green Description Standby Power On 35) BMC_LED1 (BMC Heartbeat LED) State Blinking Green Description BMC Normal - 24 - - Gigabyte WRX80-SU8-IPMI | User Manual - Page 25
POST when the power is turned on. •• Because BIOS flashing is potentially risky, if you do not encounter problems using the current version of BIOS, it is recommended that you not flash the BIOS. To flash the BIOS, do it with caution. Inadequate BIOS flashing may result in system malfunction. •• It - Gigabyte WRX80-SU8-IPMI | User Manual - Page 26
in this chapter are for reference only and may differ by BIOS version. This section provides information on your motherboard model and BIOS version. You can also select the default language used by the BIOS and manually set the system time. && System Language Selects the default language used - Gigabyte WRX80-SU8-IPMI | User Manual - Page 27
to the old CPU to recover TPM related keys and data. (Default: Enabled) `` ACPI Settings && Enable ACPI Auto Configuration Enables or disables BIOS ACPI auto configuration. (Default: Disabled) && Enable Hibernation Enables or disables system ability to Hibernate (OS/S4 sleep state). This option may - Gigabyte WRX80-SU8-IPMI | User Manual - Page 28
`` AST2500 Super IO Configuration && Serial Port 1 Configuration (the COM Port on the back panel) && Serial Port Enables or disables the serial port on the back panel. && Change Settings Select an optimal settings for Super IO Device. (Default: Auto) Please note that This item is available when - Gigabyte WRX80-SU8-IPMI | User Manual - Page 29
`` PCI Subsystem Settings && Above 4G Decoding Enables or disables 64-bit capable devices to be decoded in above 4 GB address space (only if your system supports 64-bit PCI decoding). Set to Enabled if more than one advanced graphics card are installed and their drivers are not able to be launched - Gigabyte WRX80-SU8-IPMI | User Manual - Page 30
a legacy PC boot process. Enabled Enables UEFI CSM. Disabled Disables UEFI CSM and supports UEFI BIOS boot process only. && GateA20 Active Upon Request Always GA20 can be disabled using BIOS services. (Default) GA20 cannot be disabled. This option is useful when any RT code is - Gigabyte WRX80-SU8-IPMI | User Manual - Page 31
option ROM for the graphics controller. Legacy Enables legacy option ROM only. UEFI Enables UEFI option ROM only. This item is configurable only when CSM Support is set to Enabled. && Other PCI devices Allows you to select whether to enable the UEFI or Legacy option ROM for the PCI device - Gigabyte WRX80-SU8-IPMI | User Manual - Page 32
`` Inter(R) Ethernet Controller X550 Press to configure 10 Gigabit Ethernet device parameters. `` Driver Health Provides health status for the drivers/controllers. - 32 - - Gigabyte WRX80-SU8-IPMI | User Manual - Page 33
, X4X4X4X4 Mode. (Default: x16 Mode) && PCIe Slot7 Configuration Allows you to configure the PCIEX16_7 slot. Options are: x16 Mode, X4X4X4X4 Mode. (Default: x16 Mode) && Thunderbolt Support Enables or disables the Thunderbolt function. (Default: Disabled) - 33 - - Gigabyte WRX80-SU8-IPMI | User Manual - Page 34
2-5 Chipset `` South Bridge `` SB USB Configuration This page allows you to configure the SB USB ports. && Rom Armor Enables or disables Rom Armor. `` North Bridge && Total Memory Displays the total memory information. `` Socket 0 Information Displays the information related to Socket 0. - 34 - - Gigabyte WRX80-SU8-IPMI | User Manual - Page 35
2-6 Server Mgmt && BMC Support Enables or disables interfaces to communicate with BMC. (Default: Enabled) && Wait For BMC Allows you to determine whether to wait for BMC response for specified time out. In PILOTII, BMC starts at the same time when BIOS starts during AC power ON. It takes around 30 - Gigabyte WRX80-SU8-IPMI | User Manual - Page 36
when Configuration Address source is set to Static. && IPv6 Support Enables or disables IPv6 support. (Default: Enabled) && Configuration Address source Selects to configure LAN channel parameters statically or dynamically (by BIOS or BMC). Unspecified will not modify any BMC network parameters - Gigabyte WRX80-SU8-IPMI | User Manual - Page 37
Router Lan1/Lan2 Address source Selects to configure LAN channel parameters statically or dynamically (by BIOS or BMC). Unspecified will not modify any BMC network parameters during BIOS phase. Options are: Unspecified (default), Static, DynamicBmcDhcp. && IPv6 Router IP Address Changes IPv6 Router1 - Gigabyte WRX80-SU8-IPMI | User Manual - Page 38
press . You must enter the administrator password (or user password) at system startup and when entering BIOS Setup. However, the user password only allows you to make changes to certain BIOS settings but not all. To cancel the password, press on the password item and when requested - Gigabyte WRX80-SU8-IPMI | User Manual - Page 39
the POST. && Quiet Boot Allows you to determine whether to display the GIGABYTE Logo at system startup. (Default: Enabled) && Boot Mode Selects the Fast Boot to shorten the OS boot process. (Default: Enabled) && SATA Support Last Boot SATA Devices Only Except for the previous boot drive, all - Gigabyte WRX80-SU8-IPMI | User Manual - Page 40
the USB devices are disabled before the OS boot process completes. This item is available only when Fast Boot is set to Enabled. && PS2 Devices Support Enables or disables the PS/2 devices be functioned in the operating system and during the POST. This item is available only when Fast Boot is - Gigabyte WRX80-SU8-IPMI | User Manual - Page 41
settings help the system to operate in optimum state. Always load the Optimized defaults after updating the BIOS or after clearing the CMOS values. && Save as User Defaults Save to current BIOS settings as user-defined default settings. && Restore User Defaults Load the user-define default settings - Gigabyte WRX80-SU8-IPMI | User Manual - Page 42
Chapter 3 Application BMC Web You can use the IP from BIOS Setup Manu to connect to BMC Web UI. For example, login to BMC Web using the link https://10.1.9.89. Login After entering the IP - Gigabyte WRX80-SU8-IPMI | User Manual - Page 43
Dashboard This page shows the overall monitoring information of the device status. The user warning messages and quick buttons are located at the top right of the Web UI. 1. Click on to check notification messages. 2. Click on to check warning messages. 3. Click on to change language. 4. - Gigabyte WRX80-SU8-IPMI | User Manual - Page 44
, Status, Current Reading and Behavior are displayed. Sensor readings are available for Temperature, Fan, Watchdog and Voltage Sensors as well as for supported Discrete Sensors. This page will refresh automatically with the latest data retrieved from the database. Please note that there may be some - Gigabyte WRX80-SU8-IPMI | User Manual - Page 45
to view the details of the device. FRU Device Name The device name of the selected FRU will be displayed. System Information This page displays BIOS, CPU, and DIMM Device information list. - 45 - - Gigabyte WRX80-SU8-IPMI | User Manual - Page 46
Sensor Scanning In this page, you can set to enable or disable CPU FANs and System FANs scanning. IPMI Event Log This page displays the list of events incurred by the different sensors on this device. Click on a record to see the details of - Gigabyte WRX80-SU8-IPMI | User Manual - Page 47
System Log This page displays logs of system events for this device (if the options have been configured). Note: Logs must be configured under "Settings/Log Settings/Advanced Log Settings" to display any entries. Filtering options are also available for this and all logs in this section. Audit Log - Gigabyte WRX80-SU8-IPMI | User Manual - Page 48
Recording/Auto Video Settings/Video Trigger Settings." Settings This page allows you to configure BMC options. The options are: Captured BSOD, Date & Time, External User Services, KVM Mouse Setting, Log Settings, Media Redirection Settings, Network Settings, PAM Order Settings, Platform Event Filter - Gigabyte WRX80-SU8-IPMI | User Manual - Page 49
Remote Control On this page, you can remote control your host system on BIOS Setup or Operating System. Click the Launch H5Viewer button to launch the H5viewer window. Remote Control- Example (BIOS Setup menu) This page shows the BIOS Setup settings. - 49 - - Gigabyte WRX80-SU8-IPMI | User Manual - Page 50
Image Redirection The displayed table shows remote images available to the BMC. You can start redirection or clear the images from here. Up to 4 images can be added for each image type, depending on your configuration. Power Control/UID On this page, you can remote control the power of your host - Gigabyte WRX80-SU8-IPMI | User Manual - Page 51
. 8. Click on Flash selected sections and OK from the warning message. BIOS Update Procedure: 1. Click on Maintenance > Firmware Update from the menu bar. 2. Select Update type to BIOS and Firmware Image. 3. Click on Start firmware update and click on OK from the warning message. 4. Click on Flash - Gigabyte WRX80-SU8-IPMI | User Manual - Page 52
: Motherboard Trade Name: GIGABYTE Model Number: GA-WRX80-SU8-IPMI Responsible Party - U.S. Contact and used in accordance with manufacturer's instructions, may cause harmful interference to radio local government office, your household waste disposal service or where you purchased the product for - Gigabyte WRX80-SU8-IPMI | User Manual - Page 53
-2-8912-4000, FAX: +886-2-8912-4005 Tech. and Non-Tech. Support (Sales/Marketing) : https://esupport.gigabyte.com WEB address (English): https://www.gigabyte.com WEB address (Chinese): https://www.gigabyte.com/tw •• GIGABYTE eSupport To submit a technical or non-technical (Sales/Marketing) question
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
 |
 |
GA-WRX80-SU8-IPMI
User's Manual
Rev. 1001