Gigabyte WRX80-SU8-IPMI User Manual - Page 51
Maintenance, Firmware Update, BMC Update Procedure, Public Key, Full Flash, Flash selected s
View all Gigabyte WRX80-SU8-IPMI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Maintenance This page allows you to configure BMC options. The options are Backup Configuration, Firmware Image Location, Firmware Information, Firmware Update, Preserve Configuration, Restore Configuration, Restore Factory Defaults, and System Administrator. Firmware Update BMC Update Procedure: 1. Click on Maintenance > Firmware Update from the menu bar. 2. Select Update type to BMC and Firmware Image. 3. Click on Start firmware update. 4. Click on Preserve all Configurations. 5. Upload Public Key if needed. 6. Click on Start firmware update and click on OK from the warning message. 7. Verify for section based flashing. Selecting Full Flash is recommended. 8. Click on Flash selected sections and OK from the warning message. BIOS Update Procedure: 1. Click on Maintenance > Firmware Update from the menu bar. 2. Select Update type to BIOS and Firmware Image. 3. Click on Start firmware update and click on OK from the warning message. 4. Click on Flash BIOS. - 51 -