Gigabyte Z490M GAMING X User Manual - Page 12
USB 3.2 Gen 1 Type-A Port Q-Flash Plus Port, Line Out/Front Speaker Out Green
View all Gigabyte Z490M GAMING X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
USB 3.2 Gen 1 Type-A Port (Q-Flash Plus Port) The USB 3.2 Gen 1 port supports the USB 3.2 Gen 1 specification and is compatible to the USB 2.0 specification. Use this port for USB devices. Before using Q-Flash Plus , (Note) make sure to insert the USB flash drive into this port first. Center/Subwoofer Speaker Out (Orange) Use this audio jack to connect center/subwoofer speakers. Rear Speaker Out (Black) Use this audio jack to connect rear speakers. Side Speaker Out (Gray) Use this audio jack to connect side speakers. Line In (Blue) The line in jack. Use this audio jack for line in devices such as an optical drive, walkman, etc. Line Out/Front Speaker Out (Green) The line out jack. Mic In (Pink) The Mic in jack. Audio Jack Configurations: Jack Center/Subwoofer Speaker Out Rear Speaker Out Side Speaker Out Line In Line Out/Front Speaker Out Mic In Headphone/ 2-channel a 4-channel a a 5.1-channel a a 7.1-channel a a a a a •• When removing the cable connected to a back panel connector, first remove the cable from your device and then remove it from the motherboard. •• When removing the cable, pull it straight out from the connector. Do not rock it side to side to prevent an electrical short inside the cable connector. (Note) To enable the Q-Flash Plus function please visit the "Unique Features" webpage of GIGABYTE's website. Please visit GIGABYTE's website for details on configuring the audio software. - 12 -