Haier AB122MCERA Operation Manual - Page 18
Maintenance
View all Haier AB122MCERA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Maintenance A Attention • Repair can only be performed by professional personnel. • Before touching the connection line, all power supplies should be switched off. Only after switching off the power supply can the operator clean the air conditioner as to avoid electric shock or injury. • When cleaning the air cleaner, make sure to use a stable platform; don't flush the air \._ conditioner with water, or the electric shock might be caused. Daily Maintenance: Clean the air cleaner & air inlet grid. • Don't dismantle the air cleaner if not cleaning, or faults might be caused. • When the air conditioner operates in the environment with too much dust, clean the air conditioner more times (generally once every two weeks). • AB092-482MCERA 1. Remove the air inlet grid as shown in the figure: press down the two locks on the grid (as shown in Fig. 1) to move it close to the nearby grid, gently lift it 45 degree (as shown in Fig. 2), and then remove the air inlet grid. 2. Dismantle the gauze: press the outer frame of the air inlet grid by the thumb, and draw the base angle of gauze by the forefinger and pull it out as to make the gauze disengage the locks, and dismantle the gauze (as shown in Fig. 3). press down the locks lock device lock port locks bottom of gauz Fig. 1 \ remove air inlet grid Fig. 2 lock device frame of air inlet grid Fig. 3 • AB182-482MEERA 1. Open the air inlet grid: press "PUSH" button to open the grid while the pullbacks at both sides of the grid supports the grid (as shown in Fig. 4). 2. Open the two pullbacks for suspending the air inlet grid(as shown in Fig. 5). I press "PUSH" button to let the grid fall O down I open the two pullbacks Fig. 4 Fig. 5 pullback 16