Haier GDE950AW User Manual - Page 23

English LOAD CLOTHES INTO DRYER • The appropriate load should be 1/3 ~ 1/2 of the drum volume. Avoid too much load, as space is needed to allow clothes free rotation for uniform and wrinkle-proof drying. • When drying big articles, only 2-3 pieces should be loaded at a time and supplemented with small and medium-sized articles. • For delicate clothes or less load, two towels may be added to get better drying and wrinkle-proof effects. • Do not excessively dry clothes to avoid wrinkles, shrinkage, roughness, electro-static charge accumulation, and/or more lint. Rack Dry cycle • This program is designed specially for articles like sport shoes. During drying, please make sure the articles are placed on the rack with no risk of entangling the baffles while the drum is rotating. Note: If drying rack is not in place, rolling inner tub could collide with drying rack and causes damage to the dryer and drying rack. AUTO DRY CYCLE GDE/GDG 950AW 1. Press any button except "Off" button to power on. • Turn on the power switch. The computer board will beep once and the dryer will change from off status to the initial operating status (Heavy Duty program). • If the "Start/Pause" button is not pressed in 5 min after powering on, it automatically cuts off power and returns to off status. • The dryer returns to off status immediately upon end of each cycle. Regardless, the status of the control panel, pressing OFF will stop all operations. • The default status is "Heavy Duty" program. Super Capacity Heavy Duty Normal Whites Bulky Press Free Delicate Touch Up Custom Dry Timed Dry Cool Down Cycle Completed Rack Dry Wrinkle Saver Remaining Time Extended Tumble Auto Dry Cycles Timed Dry Cycles Less Time More Time Wrinkle Saver Very More Normal Less Damp High Medium Low No Heat Louder Softer Off Sensor Dry Level Temp Signal Start Pause Off 22