Haier GDE950AW User Manual - Page 26

Timed Dry Cycle, Auto Dry Cycle

Get Haier GDE950AW PDF manuals and user guides View all Haier GDE950AW manuals
Add to My Manuals
Save this manual to your list of manuals

Page 26 highlights

English AUTO DRY CYCLE GDE/GDG 750AW 1. Turn the knob to any program except "OFF" to power on. The control panel will beep once and the dryer will change from "OFF" to the operating status. 2. Set the cycle select dial to required auto dry cycle. The signal, temperature, and dry levels are preprogrammed. To change this setting: • Press the "Dry Level" button to select suitable drying level after powering on the dryer. There are 3 options to choose from: More, Normal, or Less. • Press the "Temp" button to set a suitable drying temperature. • After powering on and selecting the cycle, the dryer selects the pre-programmed temperature. If a different drying temperature is required, press the "Temp" button to select. There are four available drying temperatures: High, medium, Low, and No Heat. • Press the "Signal" button, and the buzzer will sound upon end of cycle. • After switching on, the dryer automatically sets buzzer at "Softer". The user can choose from Louder, Softer, or OFF. • Press Start/Pause button. • When starting the machine, close the door first, then press this button. • If a pause is needed during drying, press this button. Pressing again will resume operation. Note: Your dryer has a preprogrammed wrinkle saver cycle. At the end of the autodry cycle, the beeper will signal that the load is dry. If ignored, the drum will turn for about one minute out of every five minutes, up to one hour. When the door is opened, the feature shuts off. TIMED DRY CYCLE Super Capacity Heavy Duty Normal Whites Bulky Press Free Delicate Touch Up Custom Dry Timed Dry Cool Down Cycle Completed Rack Dry Wrinkle Saver Remaining Time Extended Tumble Auto Dry Cycles Timed Dry Cycles Less Time More Time Wrinkle Saver Very More Normal Less Damp High Medium Low No Heat Louder Softer Off Sensor Dry Level Temp Signal Start Pause Off GDE/GDG 950AW 1. Press any button except "Off" button to power on. 2. Press "Timed-Dry Cycles" button and select "Timed Dry" cycle. • After powering on, press "Timed-Dry Cycle" button to select "Timed Dry" program. 3. Press "More Time" and "Less Time" buttons to set a suitable time. •  After setting "Timed-Dry Cycle" to "Timed Dry," you can press these two buttons to increase or decrease drying time as you desire. 4-6. Press buttons "Temp," "Cycle Signal," and "Wrinkle Saver" to define your desired program. 25

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
25
GDE/GDG 950AW
1. Press any button except “Off” button to power on.
2. Press “Timed-Dry Cycles” button and select “Timed Dry” cycle.
• After powering on, press “Timed-Dry Cycle” button to select “Timed Dry” program.
3. Press “More Time” and “Less Time” buttons to set a suitable time.
•
After setting “Timed-Dry Cycle” to “Timed Dry,” you can press these two buttons
to increase or decrease drying time as you desire.
4-6.
Press buttons “Temp,” “Cycle Signal,” and “Wrinkle Saver” to define your desired
program.
TIMED DRY CYCLE
Super Capacity
Heavy Duty
Normal
Whites
Bulky
Press Free
Delicate
Touch Up
Custom
Timed Dry
Rack Dry
Dry
Wrinkle Saver
Cool Down
Remaining Time
Cycle Completed
Extended Tumble
High
Medium
Low
No Heat
Louder
Softer
Off
Very
More
Normal
Less
Damp
Auto
Dry
Cycles
Timed
Dry
Cycles
Less
Time
More
Time
Wrinkle
Saver
Sensor
Dry
Level
Temp
Signal
Off
Start
Pause
English
GDE/GDG 750AW
1. Turn the knob to any program except “OFF” to power on. The control panel will beep
once and the dryer will change from “OFF” to the operating status.
2. Set the cycle select dial to required auto dry cycle. The signal, temperature, and dry
levels are preprogrammed. To change this setting:
• Press the “Dry Level” button to select suitable drying level after powering on the
dryer. There are 3 options to choose from: More, Normal, or Less.
• Press the “Temp” button to set a suitable drying temperature.
• After powering on and selecting the cycle, the dryer selects the pre-programmed
temperature. If a different drying temperature is required, press the “Temp” button
to select. There are four available drying temperatures: High, medium, Low, and
No Heat.
• Press the “Signal” button, and the buzzer will sound upon end of cycle.
• After switching on, the dryer automatically sets buzzer at “Softer”. The user
can choose from Louder, Softer, or OFF.
• Press Start/Pause button.
• When starting the machine, close the door first, then press this button.
• If a pause is needed during drying, press this button. Pressing again will
resume operation.
Note:
Your dryer has a preprogrammed wrinkle saver cycle. At the end of the autodry
cycle, the beeper will signal that the load is dry. If ignored, the drum will turn
for about one minute out of every five minutes, up to one hour. When the door
is opened, the feature shuts off.
AUTO DRY CYCLE