Haier GDE950AW User Manual - Page 27
Timed Dry Cycle, Rack Dry Cycle
![]() |
View all Haier GDE950AW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
English Note: For "Timed Dry" program, use of buttons "Temp," "Cycle Signal," and "Wrinkle Saver" is the same as for auto-programs. "Sensor Dryness Level" is inactive, and a beep will sound if pressed. 7. Press "Start/Pause" button. TIMED DR Y C YC LE More No rmal Less Dry Level Cycle Select Off High Medium Low No Heat Timed D ry Rack D ry 90 Heavy Duty 60 30 Normal 20 10 Temp Touch Up Delicates Timed Dry Whites Auto Dry Timed D ry Louder Softer Off Signal Clean Lint Drying Cool Down W rinkle Saver Cycle Process GDE/GDG 750AW 1. Turn the knob to any program except "OFF" to power on. The control panel will beep once and the dryer will change from "OFF" to the operating status. If Start/Pause button is not pressed five minutes after powering on, the dryer will automatically return to OFF status. 2. Set the cycle select dial to Timed Dry Cycle. 3. Press "Timed Dry" button to set the required drying time. 4-6. Press "Temp" and "Signal" to define the required programs. Note: For "Timed Dry" program use of "Temp" and "Signal" buttons is the same as for auto-programs. "Dry Level" is inactive. R ACK DR Y CYCLE Super Capacity Heavy Duty Nor mal Whites Bulky Press Free Delicate Touch Up Custom Dry Timed Dr y Cool Down Cycle Completed Rack Dr y W rinkle Saver Remaining T ime Extended T umble Auto Dry Cycles Timed Dry Cycles Less Time More Time W rinkle Saver Very More Nor mal Less Damp High Medium Low No Heat Louder Softer Off Sensor Dry Level Temp Signal Star t Pause Off 1. Press any button except "Off" button to power on. 2. Press "Timed-Dry Cycles" button and select "Rack Dry" cycle. • After powering on, press "Timed-Dry Cycle" button to select "Rack Dry" program. 3. Press "More Time" And "Less Time" buttons to set a suitable time. • After setting "Timed-Dry Cycle" to "Rack Dry", you can press these two buttons to increase or decrease drying time as you desire. 4-7. Press buttons "Temp," "Signal," "Wrinkle Saver," and "Touch Up" to define your desired program. Notes : For "Rack Dry" program, use of buttons "Temp," "Signal," "Wrinkle Saver," and "Touch up" is the same as for auto-programs. "Sensor Dry Level" is inactive, and a beep will sound if pressed. 8. Press "Start/Pause" button. 26
![](/manual_guide/products/haier-gde950aw-user-manual-a18abcc/27.png)