Haier HBF05EBSS Product Manual - Page 13
Operating Your Beer Dispenser
UPC - 688057300108
View all Haier HBF05EBSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
English Operating Your Beer Dispenser Dispensing Beer Follow the steps below to dispense beer. 1. Make sure that the beer dispenser is plugged in properly to a 120V, 60Hz, 15 Amp grounded AC outlet. 2. Place the drip tray under the beer faucet. 3. Open the beer faucet by pulling the tap towards you quickly and completely to dispense the beer. Note: If for any reason the beer does not come out of the tap, refer to the trouble-shooting guide on page 17. 4. Increase the pressure if the beer runs too slowly. At the correct pressure and temperature, a 10oz. glass should be filled in 5 seconds. 5. Hold the glass steady at a 45˚ angle. When it is 2/3 full, start straightening the glass. Proper foam should be a tight creamy head and the collar on an average glass should be 3/4" to 1" high. Note: It is normal to see condensation forming on the outer surface of the faucet. It is caused by the difference in temperature between the cold beer and the inner surfaces of the faucet when beer is flowing through the line. 12