Haier HBF05EBSS Product Manual - Page 9
Warning - replacement parts
UPC - 688057300108
View all Haier HBF05EBSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
English Installing the Guardrail Follow the steps below to install the guardrail on the worktop. 1. Place the guardrail on top of the cabinet. 2. Align all holes of the guardrail with the holes of the cabinet. 3. Secure the guardrail to the cabinet with eight small Phillips-Head screws. Installation Instructions Note: Your CO2 cylinder is shipped empty to avoid any possible accidents during transportation. When you purchase the first keg of beer, have your CO2 cylinder filled by your local compressed gas supplier. (See Welding Supply in Yellow Pages) WARNING! CO2 can be dangerous! CO2 cylinders contain high-pressured gas, which can be hazardous if handled improperly. They must be handled with care. Tapping the Beer Keg (American Sankey Type Barrel) Your beer dispenser comes with "Lo-Boy Sankey Coupler American Type." This brand name is the most widely used in the United States. Before purchasing a keg, check with your beer distributor to make sure that an American Sankey Tap can be used. (Replacement and other taps are available at www.draughttech.com) Remove and identify the following components from the parts box: 1. (1) CO2 Regulator - dual gauge - dual outlet 2. (1) CO2 Tank - 5 pound - EMPTY 3. (2) Keg couplers - low profile type (Lo-Boy Sankey Coupler American Type) 4. (4) White plastic squeeze clamps 5. (2) 4 foot long red hose 6. (1) Cleaning kit BE SURE THAT BEFORE INSTALLATION YOU HAVE FILLED YOUR TANK WITH GAS 8