Haier HDC2406TW HDC2406TW Manual - Page 10

English G. With all the fittings connected, open the tap to test to make sure there are no leaks. Connect the A/C power cord and use the dishwasher as outlined in the manual. H. When finished using the dishwasher, you need to close the water supply to the tap and disconnect the power supply cord.. WARNING: The water intake hose is now pressurized. Press the red pressure release button on the Quick Release Faucet Adapter, which will depressurize the water intake hose to easily remove without squirting water which can be very hot and cause scalding. The Quick Release Faucet Adapter should then be disconnected from the faucet and stored for next use. CAUTION: Do not let children disconnect the dishwasher. Close supervision of children is always important around appliances. PERMANENT INSTALLATION The permanent installation will require connecting the dishwasher to a permanent "HOT" water intake, usually tapped off from the sink's hot water line. Also, the dishwasher's grey drain hose (included) needs to be connected to a special sink drain pipe (not included) under the sink / counter. We recommend that you Contact a qualified person to carry out the permanent installation. The dishwasher must be installed to meet all local codes and ordinances for electrical and plumbing connections. Parts Needed for Permanent Installation Intake Hose: You will need to purchase a standard 3/4" intake dishwasher hose and fittings to make a permanent installation. Direct connect dishwasher tail pipe: You will need to purchase a dishwasher tail pipe designed to connect to a kitchen sink drain, and a matching hose clamp. 9