Haier HDC2406TW HDC2406TW Manual - Page 20

English Using The Delay Feature The start of the HDC2406 can be delayed between 1 and 24 hours in one hour increments. To utilize this feature: 1. Press "ON/OFF" button to "on" position 2. Press "PROGRAM" button 3. Press "DELAY" button once for each hour of delay (i.e. press 3 times to delay start 3 hours) To cancel the delay feature: 1. Press "ON/OFF" button to "off" position. Care and Maintenance Filter system The filter system consists of a coarse filter, a flat (main filter) and a micro filter (fine filter). 1. Main filter: Food and soil particles trapped by this filter are pulverized by a special jet on the spray arm and washed down the drain. 2. Fine filter: This filter holds soil and food residue in the sump area and prevents it from being deposited on the dishes during wash cycle. 3. Coarse filter: Larger items, such as those that could block the drain, are trapped in the coarse filter. To remove the items caught by the filter, gently squeeze the tap on the top of this filter and lift out. The filter efficiently removes food particles from the wash water, allowing it to be recycled. For best performance and results, the filter assembly must be cleaned regularly. For this reason, it is a good idea to remove the larger food particles trapping in the filter after each wash cycle by rinsing the filter assembly under running water. To clean the coarse filter and the fine filter, use a soft cleaning brush. Reassemble the filter parts as shown in the diagram and reinsert the entire assembly in the dishwasher, positioning in its seat and pressing downward. To remove the filter assembly, grab the handle of the fine filter, rotate it counter clockwise then pull in an upward direction. Step 1: rotate the fine filter counter clockwise; Step 2: lift fine filter up; Step 3: lift main filter up NOTE: Reverse this procedure to reinstall the filter. 19