Haier HDC2406TW HDC2406TW Manual - Page 23

English Problem Possible Causes Possible Solution: The dishes are not clean. The dishes were not loaded correctly See "Loading the Dishwasher Rack" section of this manual. The program selected was not the appropriate cycle for the condition of the dishes. Select a more intense program. Not enough detergent was dispensed. Use more detergent, or change the type of detergent being used. Items were blocking the rotation path of the water spray arm. Rearrange the items accordingly so that the spray arm can rotate freely. The filter assembly in the base of the unit is not clean, is clogged, or is not installed correctly. (This may cause the spray arm jets to become clogged). Clean and/or fit the filter assembly correctly. Clean the spray arm jets. See the "Cleaning the Spray Arm "section of this manual. Cloudiness on the glassware. This is a combination of soft water and too much detergent. Use less detergent if you have soft water and select a shorter cycle to wash the glassware to get them clean. Black or gray Aluminum utensils have rubbed against Use a mild abrasive cleaner to remove the marks on dishes. the dishes. marks Detergent left in the dispenser cups. Dishes blocked the detergent cups not allowing them to open completely during the wash cycle. Rearrange the dishes accordingly and rerun the wash cycle. The dishes are not dry Improper loading See "Loading the Dishwasher Rack" section of this manual. Too little rinse aid Increase the amount of rinse aid dispensed or refill the rinse aid dispenser if empty. Dishes were removed from the washer too soon. Do not empty your dishwasher immediately after the cycle ends. Open the door slightly so that the steam can escape. Begin unloading the dishwasher once the dishes are barely warm to the touch. Wrong program / cycle selected. Shorter cycles/programs use lower temperatures which also lowers cleaning performance. Choose a cycle / program with a longer wash time. Using cutlery with a low quality coating. Water drainage is more difficult with these items. Cutlery or dishes of this type are not suitable for dishwasher use. Error codes Your dishwasher has an error code indicator function. For certain appliance malfunctions, the corresponding error code will be shown in the LED display: Code E1 E4 22 Meaning Water Intake Problem Overflow Possible cause Faucet is not opened, water intake is restricted, or water pressure is too low. Some element of dishwasher is leaking. Turn main water supply off immediately! Remove water from around base before restarting dishwasher.